This is the latest recevied telemetry packets stored in our database for station/object OK1TZL. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Uin*
Rx1h*
Dg1h*
Rx10m*
Temp*
1757501372
13.88 Volt
550 Pkt
20 Pkt
81 Pkt
17.6 C
1757498674
13.88 Volt
570 Pkt
20 Pkt
87 Pkt
17.6 C
1757498672
13.88 Volt
570 Pkt
20 Pkt
87 Pkt
17.6 C
1757496874
13.88 Volt
460 Pkt
20 Pkt
101 Pkt
17.5 C
1757495972
13.88 Volt
400 Pkt
20 Pkt
66 Pkt
17.5 C
1757495074
13.88 Volt
390 Pkt
20 Pkt
62 Pkt
17.4 C
1757493272
13.88 Volt
410 Pkt
20 Pkt
58 Pkt
17.4 C
1757491474
13.88 Volt
440 Pkt
20 Pkt
70 Pkt
17.4 C
1757490572
13.88 Volt
470 Pkt
20 Pkt
65 Pkt
17.3 C
*Used Equation Coefficients:
Uin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Rx10m: 0, 1, 0
Temp: 0, 0.1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)