IU2SKW-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IU2SKW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxPkt*	TxPkt*	Batt*
1761526281	23 Pkt/10m	23 Pkt/10m	3.78 Volt
1761522737	29 Pkt/10m	29 Pkt/10m	3.78 Volt
1761519193	22 Pkt/10m	22 Pkt/10m	3.78 Volt
1761515649	20 Pkt/10m	20 Pkt/10m	3.78 Volt
1761512114	19 Pkt/10m	19 Pkt/10m	3.82 Volt
1761508560	16 Pkt/10m	16 Pkt/10m	3.8 Volt
1761505016	18 Pkt/10m	18 Pkt/10m	3.82 Volt
1761503675	22 Pkt/10m	21 Pkt/10m	3.78 Volt
1761500131	29 Pkt/10m	29 Pkt/10m	3.78 Volt
1761496586	30 Pkt/10m	29 Pkt/10m	3.78 Volt
1761493042	27 Pkt/10m	26 Pkt/10m	3.78 Volt
1761489498	34 Pkt/10m	33 Pkt/10m	3.78 Volt
1761485956	32 Pkt/10m	32 Pkt/10m	3.78 Volt
1761482410	32 Pkt/10m	32 Pkt/10m	3.78 Volt
1761471777	38 Pkt/10m	38 Pkt/10m	3.8 Volt
1761468233	28 Pkt/10m	28 Pkt/10m	3.78 Volt
1761464688	24 Pkt/10m	22 Pkt/10m	3.78 Volt
1761457600	27 Pkt/10m	27 Pkt/10m	3.84 Volt
1761454056	27 Pkt/10m	23 Pkt/10m	3.8 Volt
1761450512	25 Pkt/10m	25 Pkt/10m	3.78 Volt
1761446968	25 Pkt/10m	25 Pkt/10m	3.78 Volt
1761439879	26 Pkt/10m	24 Pkt/10m	3.78 Volt
1761436335	23 Pkt/10m	23 Pkt/10m	3.78 Volt
1761432791	23 Pkt/10m	23 Pkt/10m	3.78 Volt
1761425703	25 Pkt/10m	25 Pkt/10m	3.78 Volt

*Used Equation Coefficients:

RxPkt: 0, 1, 0

TxPkt: 0, 1, 0

Batt: 0, 0.0196, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)