OK9MAD-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK9MAD-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPU.Temp*	Env.Temp*	Env.Hum*
1784710491	40.8 Deg.C	19.6 Deg.C	49.6 Perc
1784710191	40.8 Deg.C	19.3 Deg.C	49.6 Perc
1784709891	40.8 Deg.C	19.1 Deg.C	49.8 Perc
1784709591	39.7 Deg.C	19 Deg.C	49.6 Perc
1784709292	40.2 Deg.C	19 Deg.C	49.9 Perc
1784708992	39.7 Deg.C	18.7 Deg.C	49.9 Perc
1784708692	39.7 Deg.C	18.7 Deg.C	49.7 Perc
1784708391	40.2 Deg.C	18.8 Deg.C	49.8 Perc
1784708091	39.7 Deg.C	18.5 Deg.C	49.8 Perc
1784707793	39.2 Deg.C	18.6 Deg.C	49.7 Perc
1784707491	39.7 Deg.C	18.7 Deg.C	49.7 Perc
1784707192	39.7 Deg.C	18.6 Deg.C	49.7 Perc
1784706892	39.2 Deg.C	18.5 Deg.C	49.7 Perc
1784706592	39.7 Deg.C	18.5 Deg.C	49.8 Perc
1784706291	39.7 Deg.C	18.3 Deg.C	50.1 Perc
1784705991	39.7 Deg.C	18 Deg.C	50.3 Perc
1784705691	39.2 Deg.C	17.8 Deg.C	50.6 Perc
1784705391	38.6 Deg.C	17.5 Deg.C	50.7 Perc
1784705092	37.6 Deg.C	17.2 Deg.C	51.1 Perc
1784704792	38.1 Deg.C	16.9 Deg.C	51 Perc
1784704492	37.6 Deg.C	16.8 Deg.C	51 Perc
1784704191	38.1 Deg.C	16.8 Deg.C	51 Perc
1784703891	37.6 Deg.C	16.8 Deg.C	50.9 Perc
1784703591	37.6 Deg.C	16.8 Deg.C	50.9 Perc
1784703291	38.1 Deg.C	16.7 Deg.C	51.1 Perc

*Used Equation Coefficients:

CPU.Temp: 0, 1, 0

Env.Temp: 0, 1, 0

Env.Hum: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)