KI6GVQ-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KI6GVQ-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1784717268	0.85 Load	43.82 DegC	254 Mb	10027 Pkt	8160 Pkt
1784716969	0.58 Load	42.84 DegC	272 Mb	10075 Pkt	8214 Pkt
1784716668	0.33 Load	42.84 DegC	264 Mb	11014 Pkt	8608 Pkt
1784716369	0.56 Load	42.84 DegC	275 Mb	10831 Pkt	9148 Pkt
1784716068	0.66 Load	43.33 DegC	279 Mb	10431 Pkt	8557 Pkt
1784715769	0.53 Load	42.84 DegC	283 Mb	10379 Pkt	8357 Pkt
1784715468	0.25 Load	43.33 DegC	289 Mb	10864 Pkt	8887 Pkt
1784715169	0.33 Load	42.84 DegC	293 Mb	10025 Pkt	8374 Pkt
1784714868	0.42 Load	43.33 DegC	296 Mb	11122 Pkt	8729 Pkt
1784714569	0.33 Load	42.36 DegC	304 Mb	11134 Pkt	9710 Pkt
1784714268	0.42 Load	42.84 DegC	308 Mb	9646 Pkt	7811 Pkt
1784713969	0.26 Load	43.33 DegC	257 Mb	10247 Pkt	8262 Pkt
1784713668	0.37 Load	42.36 DegC	253 Mb	9872 Pkt	7986 Pkt
1784713369	0.75 Load	44.3 DegC	265 Mb	9749 Pkt	7765 Pkt
1784713068	0.43 Load	43.82 DegC	265 Mb	10534 Pkt	8523 Pkt
1784712768	0.65 Load	43.82 DegC	270 Mb	10370 Pkt	8012 Pkt
1784712469	0.4 Load	44.3 DegC	277 Mb	9759 Pkt	7711 Pkt
1784712168	0.9 Load	43.82 DegC	283 Mb	10731 Pkt	8609 Pkt
1784711869	0.45 Load	43.33 DegC	295 Mb	9842 Pkt	7970 Pkt
1784711568	0.57 Load	42.84 DegC	295 Mb	9734 Pkt	8034 Pkt
1784711269	0.39 Load	43.33 DegC	301 Mb	10215 Pkt	8292 Pkt
1784710968	0.54 Load	43.33 DegC	302 Mb	9672 Pkt	7871 Pkt
1784710669	0.31 Load	42.84 DegC	305 Mb	9493 Pkt	7723 Pkt
1784710368	0.37 Load	43.33 DegC	308 Mb	10417 Pkt	8332 Pkt
1784710069	0.3 Load	43.82 DegC	313 Mb	10027 Pkt	8311 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)