YB1JQC-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YB1JQC-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1789968724	18 Pkt	0 Pkt	-71 dBm	5.95 V
1789967799	19 Pkt	0 Pkt	-72 dBm	5.95 V
1789966876	16 Pkt	2 Pkt	-73 dBm	5.95 V
1789965952	16 Pkt	0 Pkt	-72 dBm	5.93 V
1789965027	18 Pkt	0 Pkt	-72 dBm	5.95 V
1789964101	21 Pkt	3 Pkt	-72 dBm	5.95 V
1789963177	10 Pkt	1 Pkt	-71 dBm	5.95 V
1789962254	18 Pkt	1 Pkt	-72 dBm	5.95 V
1789961329	17 Pkt	2 Pkt	-71 dBm	5.95 V
1789960406	12 Pkt	1 Pkt	-72 dBm	5.97 V
1789959483	18 Pkt	3 Pkt	-71 dBm	5.95 V
1789958559	13 Pkt	4 Pkt	-72 dBm	5.95 V
1789957634	20 Pkt	5 Pkt	-72 dBm	5.95 V
1789956711	18 Pkt	7 Pkt	-72 dBm	5.95 V
1789955786	16 Pkt	3 Pkt	-72 dBm	5.95 V
1789954861	19 Pkt	3 Pkt	-72 dBm	5.95 V
1789953936	12 Pkt	1 Pkt	-72 dBm	5.95 V
1789953012	26 Pkt	5 Pkt	-72 dBm	5.95 V
1789952087	14 Pkt	3 Pkt	-71 dBm	5.95 V
1789951162	15 Pkt	5 Pkt	-71 dBm	5.95 V
1789950237	7 Pkt	1 Pkt	-72 dBm	5.95 V
1789949314	15 Pkt	3 Pkt	-71 dBm	5.95 V
1789948390	9 Pkt	0 Pkt	-71 dBm	5.93 V
1789947465	12 Pkt	2 Pkt	-71 dBm	5.95 V
1789946542	6 Pkt	2 Pkt	-70 dBm	5.95 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)