DB0EIR-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0EIR-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Temp*	Humi*
1762340163	22.1 deg C	45.2 %
1762339263	22 deg C	45.1 %
1762338363	22 deg C	44.9 %
1762337463	21.8 deg C	44.8 %
1762336563	21.6 deg C	44.6 %
1762335663	21.5 deg C	44.1 %
1762334763	21.6 deg C	44.2 %
1762333863	21.5 deg C	45.1 %
1762332630	21.4 deg C	44.9 %
1762331730	21.3 deg C	45.1 %
1762330830	21.3 deg C	45.3 %
1762329930	21.2 deg C	45.5 %
1762329030	21.1 deg C	46 %
1762328130	21.1 deg C	46 %
1762327230	21.1 deg C	46 %
1762326330	21.2 deg C	45.9 %
1762325430	21.2 deg C	45.8 %
1762324529	21.3 deg C	45.8 %
1762323629	21.3 deg C	45.7 %
1762322729	21.3 deg C	45.7 %
1762321829	21.4 deg C	45.7 %
1762320929	21.5 deg C	45.6 %
1762320601	21.5 deg C	45.6 %
1762319700	21.6 deg C	45.5 %
1762318800	21.6 deg C	45.5 %

*Used Equation Coefficients:

Temp: 0, 0.1, 0

Humi: 0, 0.1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)