SQ5E Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ5E. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1784699402	12 Deg.C	4 %
1784698805	14 Deg.C	4 %
1784698201	13 Deg.C	4 %
1784697605	13 Deg.C	4 %
1784697001	12 Deg.C	4 %
1784696402	14 Deg.C	4 %
1784695805	11 Deg.C	4 %
1784695202	11 Deg.C	4 %
1784694605	13 Deg.C	4 %
1784694002	12 Deg.C	4 %
1784693405	11 Deg.C	4 %
1784692802	17 Deg.C	4 %
1784692205	11 Deg.C	4 %
1784691601	10 Deg.C	4 %
1784691005	10 Deg.C	4 %
1784690401	12 Deg.C	4 %
1784689805	11 Deg.C	4 %
1784689202	15 Deg.C	4 %
1784688607	11 Deg.C	4 %
1784687401	13 Deg.C	4 %
1784686813	12 Deg.C	4 %
1784686202	11 Deg.C	4 %
1784685605	12 Deg.C	4 %
1784685002	13 Deg.C	4 %
1784684405	11 Deg.C	4 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)