TA1NI-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA1NI-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1777087473	80 Pkt	22 Pkt	2 Pkt	-52 dBm	0.04 V
1777086743	78 Pkt	20 Pkt	0 Pkt	-53 dBm	0.04 V
1777086013	78 Pkt	16 Pkt	2 Pkt	-51 dBm	0.04 V
1777085283	85 Pkt	16 Pkt	0 Pkt	-49 dBm	0.04 V
1777084553	64 Pkt	14 Pkt	0 Pkt	-48 dBm	0.04 V
1777083823	79 Pkt	16 Pkt	1 Pkt	-59 dBm	0.04 V
1777083093	86 Pkt	16 Pkt	0 Pkt	-50 dBm	0.04 V
1777082363	70 Pkt	14 Pkt	0 Pkt	-50 dBm	0.04 V
1777081633	78 Pkt	10 Pkt	0 Pkt	-51 dBm	0.04 V
1777080903	74 Pkt	11 Pkt	1 Pkt	-49 dBm	0.04 V
1777080173	72 Pkt	15 Pkt	1 Pkt	-49 dBm	0.04 V
1777079443	83 Pkt	14 Pkt	0 Pkt	-51 dBm	0.04 V
1777078713	70 Pkt	11 Pkt	0 Pkt	-52 dBm	0.04 V
1777077983	73 Pkt	3 Pkt	0 Pkt	-51 dBm	0.04 V
1777077253	64 Pkt	3 Pkt	0 Pkt	-50 dBm	0.04 V
1777076523	73 Pkt	1 Pkt	0 Pkt	-48 dBm	0.04 V
1777075793	9 Pkt	0 Pkt	0 Pkt	-50 dBm	0.04 V
1777075338	55 Pkt	18 Pkt	0 Pkt	-49 dBm	0.04 V
1777074607	73 Pkt	14 Pkt	0 Pkt	-52 dBm	0.04 V
1777073877	58 Pkt	17 Pkt	0 Pkt	-52 dBm	0.04 V
1777073148	74 Pkt	15 Pkt	0 Pkt	-54 dBm	0.04 V
1777072418	64 Pkt	19 Pkt	0 Pkt	-52 dBm	0.02 V
1777071688	64 Pkt	18 Pkt	0 Pkt	-54 dBm	0.04 V
1777070958	57 Pkt	18 Pkt	0 Pkt	-53 dBm	0.04 V
1777070228	39 Pkt	16 Pkt	0 Pkt	-51 dBm	0.04 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)