KF0PEC-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KF0PEC-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	amp5A*
1780571131	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1780569329	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1780567527	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1780565726	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1780563924	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1780562122	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1780560320	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1780558519	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1780556717	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1780554915	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1780553113	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1780551311	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1780549510	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1780547708	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1780545906	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1780544104	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1780542303	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1780540501	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1780538699	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1780536898	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1780535096	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1780533294	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1780531492	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1780529690	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH
1780527889	20.15 Volt	0 Pkt	0 Pkt	0 Pcnt	0 aH

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

amp5A: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)