XE2KK-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE2KK-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1757587619	14.25 Volt	100 Pkt	50 Pkt	62 Pcnt	27 C
1757585819	12.45 Volt	100 Pkt	40 Pkt	53 Pcnt	27 C
1757584020	14.18 Volt	100 Pkt	40 Pkt	51 Pcnt	27 C
1757583119	14.18 Volt	100 Pkt	40 Pkt	55 Pcnt	27.5 C
1757582220	14.18 Volt	120 Pkt	40 Pkt	63 Pcnt	27.5 C
1757581320	14.18 Volt	120 Pkt	40 Pkt	65 Pcnt	27.5 C
1757580420	14.18 Volt	100 Pkt	40 Pkt	63 Pcnt	27.5 C
1757579520	14.18 Volt	80 Pkt	30 Pkt	65 Pcnt	27.5 C
1757578620	14.1 Volt	30 Pkt	10 Pkt	49 Pcnt	27.5 C
1757577720	14.1 Volt	20 Pkt	20 Pkt	51 Pcnt	27.5 C
1757576820	14.1 Volt	20 Pkt	20 Pkt	63 Pcnt	27.5 C
1757575920	14.1 Volt	20 Pkt	20 Pkt	67 Pcnt	27.5 C
1757575020	14.1 Volt	10 Pkt	10 Pkt	78 Pcnt	28 C
1757574120	14.1 Volt	20 Pkt	20 Pkt	100 Pcnt	28 C
1757573220	14.03 Volt	10 Pkt	10 Pkt	100 Pcnt	28 C
1757572321	14.03 Volt	20 Pkt	20 Pkt	100 Pcnt	28 C
1757568720	14.03 Volt	20 Pkt	20 Pkt	100 Pcnt	28 C
1757566020	14.03 Volt	20 Pkt	20 Pkt	100 Pcnt	28 C
1757565120	14.1 Volt	20 Pkt	20 Pkt	100 Pcnt	28 C
1757563320	14.03 Volt	20 Pkt	20 Pkt	100 Pcnt	28 C
1757551633	14.1 Volt	40 Pkt	40 Pkt	97 Pcnt	28.5 C
1757544420	14.03 Volt	40 Pkt	40 Pkt	95 Pcnt	28.5 C
1757540821	14.1 Volt	40 Pkt	40 Pkt	97 Pcnt	28.5 C
1757539021	14.03 Volt	40 Pkt	40 Pkt	97 Pcnt	28.5 C
1757538119	14.1 Volt	40 Pkt	40 Pkt	98 Pcnt	28.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)