W5LND-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W5LND-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1780558844	13.43 Volt	120 Pkt	40 Pkt	68 Pcnt
1780558841	13.43 Volt	120 Pkt	40 Pkt	68 Pcnt
1780558541	13.43 Volt	100 Pkt	40 Pkt	66 Pcnt
1780558241	13.43 Volt	100 Pkt	40 Pkt	63 Pcnt
1780557941	13.43 Volt	90 Pkt	30 Pkt	64 Pcnt
1780557641	13.43 Volt	90 Pkt	40 Pkt	64 Pcnt
1780557341	13.43 Volt	90 Pkt	30 Pkt	64 Pcnt
1780557041	13.43 Volt	90 Pkt	40 Pkt	63 Pcnt
1780556741	13.43 Volt	90 Pkt	30 Pkt	62 Pcnt
1780556444	13.5 Volt	90 Pkt	30 Pkt	62 Pcnt
1780556441	13.5 Volt	90 Pkt	30 Pkt	62 Pcnt
1780556141	13.43 Volt	90 Pkt	30 Pkt	62 Pcnt
1780555541	13.43 Volt	100 Pkt	30 Pkt	65 Pcnt
1780555241	13.5 Volt	90 Pkt	30 Pkt	63 Pcnt
1780554941	13.43 Volt	100 Pkt	30 Pkt	66 Pcnt
1780554641	13.43 Volt	110 Pkt	30 Pkt	65 Pcnt
1780554341	13.5 Volt	110 Pkt	40 Pkt	66 Pcnt
1780554042	13.43 Volt	100 Pkt	30 Pkt	66 Pcnt
1780554041	13.43 Volt	100 Pkt	30 Pkt	66 Pcnt
1780553741	13.43 Volt	100 Pkt	40 Pkt	66 Pcnt
1780553444	13.43 Volt	100 Pkt	40 Pkt	66 Pcnt
1780553441	13.43 Volt	100 Pkt	40 Pkt	66 Pcnt
1780553141	13.43 Volt	110 Pkt	40 Pkt	66 Pcnt
1780552844	13.5 Volt	100 Pkt	40 Pkt	67 Pcnt
1780552841	13.5 Volt	100 Pkt	40 Pkt	67 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)