INDMT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object INDMT. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1761548284	14.03 Volt	30 Pkt	10 Pkt	24 Pcnt
1761547984	14.03 Volt	30 Pkt	10 Pkt	24 Pcnt
1761547684	14.03 Volt	30 Pkt	10 Pkt	24 Pcnt
1761547384	14.03 Volt	30 Pkt	10 Pkt	24 Pcnt
1761547084	14.03 Volt	40 Pkt	10 Pkt	26 Pcnt
1761546784	14.03 Volt	60 Pkt	20 Pkt	42 Pcnt
1761546484	14.03 Volt	100 Pkt	40 Pkt	52 Pcnt
1761546184	14.03 Volt	100 Pkt	40 Pkt	55 Pcnt
1761545884	14.03 Volt	100 Pkt	40 Pkt	56 Pcnt
1761545584	14.03 Volt	100 Pkt	40 Pkt	58 Pcnt
1761545284	14.03 Volt	110 Pkt	50 Pkt	60 Pcnt
1761544984	14.03 Volt	110 Pkt	50 Pkt	58 Pcnt
1761544684	14.1 Volt	110 Pkt	50 Pkt	60 Pcnt
1761544384	14.03 Volt	110 Pkt	50 Pkt	60 Pcnt
1761544084	14.03 Volt	110 Pkt	50 Pkt	60 Pcnt
1761543784	14.03 Volt	110 Pkt	50 Pkt	63 Pcnt
1761543484	14.03 Volt	100 Pkt	50 Pkt	63 Pcnt
1761543184	14.03 Volt	60 Pkt	20 Pkt	54 Pcnt
1761542884	14.1 Volt	40 Pkt	10 Pkt	47 Pcnt
1761542584	14.03 Volt	40 Pkt	10 Pkt	48 Pcnt
1761542284	14.03 Volt	30 Pkt	10 Pkt	46 Pcnt
1761541984	14.03 Volt	30 Pkt	10 Pkt	42 Pcnt
1761541684	14.1 Volt	30 Pkt	10 Pkt	44 Pcnt
1761541384	14.03 Volt	30 Pkt	10 Pkt	50 Pcnt
1761541084	14.1 Volt	30 Pkt	10 Pkt	51 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)