IR1ZYZ-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR1ZYZ-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxPkt*	TxPkt*	Batt*
1784677112	15 Pkt/10m	0 Pkt/10m	4 Volt
1784676507	15 Pkt/10m	0 Pkt/10m	4.02 Volt
1784675902	16 Pkt/10m	0 Pkt/10m	4.02 Volt
1784675297	20 Pkt/10m	0 Pkt/10m	4.06 Volt
1784674692	17 Pkt/10m	0 Pkt/10m	4 Volt
1784674087	19 Pkt/10m	0 Pkt/10m	4.04 Volt
1784673482	21 Pkt/10m	0 Pkt/10m	4 Volt
1784672876	15 Pkt/10m	0 Pkt/10m	4.04 Volt
1784672270	20 Pkt/10m	0 Pkt/10m	4.04 Volt
1784671666	21 Pkt/10m	0 Pkt/10m	4.04 Volt
1784671060	19 Pkt/10m	0 Pkt/10m	4.06 Volt
1784670454	17 Pkt/10m	0 Pkt/10m	4.02 Volt
1784669849	17 Pkt/10m	0 Pkt/10m	4.04 Volt
1784669244	14 Pkt/10m	0 Pkt/10m	4.02 Volt
1784668638	22 Pkt/10m	0 Pkt/10m	4.04 Volt
1784668032	15 Pkt/10m	0 Pkt/10m	4.08 Volt
1784667428	15 Pkt/10m	0 Pkt/10m	4.04 Volt
1784666823	17 Pkt/10m	0 Pkt/10m	4.04 Volt
1784666217	15 Pkt/10m	0 Pkt/10m	4.02 Volt
1784665613	18 Pkt/10m	0 Pkt/10m	4.02 Volt
1784665008	19 Pkt/10m	0 Pkt/10m	4.04 Volt
1784664403	15 Pkt/10m	0 Pkt/10m	4.02 Volt
1784663883	3 Pkt/10m	0 Pkt/10m	4.04 Volt
1784663799	18 Pkt/10m	0 Pkt/10m	4.02 Volt
1784663203	20 Pkt/10m	0 Pkt/10m	4.02 Volt

*Used Equation Coefficients:

RxPkt: 0, 1, 0

TxPkt: 0, 1, 0

Batt: 0, 0.0196, 0

Volt Aux: 0, 0.1, 0

Ampere Aux: 0, 0.01, -1.27

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)