VA7GFZ-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VA7GFZ-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Temp*	Rx1h*	Eff1h*	A5*
1784687585	0 Volt	0 C	110 Pkt	0 Pcnt	0 None
1784687285	0 Volt	0 C	110 Pkt	0 Pcnt	0 None
1784686985	0 Volt	0 C	110 Pkt	0 Pcnt	0 None
1784686685	0 Volt	0 C	120 Pkt	0 Pcnt	0 None
1784686385	0 Volt	0 C	120 Pkt	0 Pcnt	0 None
1784686085	0 Volt	0 C	110 Pkt	0 Pcnt	0 None
1784685785	0 Volt	0 C	110 Pkt	0 Pcnt	0 None
1784685485	0 Volt	0 C	110 Pkt	0 Pcnt	0 None
1784685185	0 Volt	0 C	110 Pkt	0 Pcnt	0 None
1784684885	0 Volt	0 C	110 Pkt	0 Pcnt	0 None
1784684585	0 Volt	0 C	120 Pkt	0 Pcnt	0 None
1784684285	0 Volt	0 C	120 Pkt	0 Pcnt	0 None
1784684001	0 Volt	0 C	120 Pkt	0 Pcnt	0 None
1784683685	0 Volt	0 C	130 Pkt	0 Pcnt	0 None
1784683385	0 Volt	0 C	130 Pkt	0 Pcnt	0 None
1784683085	0 Volt	0 C	130 Pkt	0 Pcnt	0 None
1784682785	0 Volt	0 C	130 Pkt	0 Pcnt	0 None
1784682485	0 Volt	0 C	130 Pkt	0 Pcnt	0 None
1784682185	0 Volt	0 C	130 Pkt	0 Pcnt	0 None
1784681885	0 Volt	0 C	130 Pkt	0 Pcnt	0 None
1784681585	0 Volt	0 C	130 Pkt	0 Pcnt	0 None
1784681286	0 Volt	0 C	120 Pkt	0 Pcnt	0 None
1784680986	0 Volt	0 C	120 Pkt	0 Pcnt	0 None
1784680685	0 Volt	0 C	120 Pkt	0 Pcnt	0 None
1784680386	0 Volt	0 C	120 Pkt	0 Pcnt	0 None

*Used Equation Coefficients:

Vin: 0, 0.2, 0

Temp: 0, 0.5, -64

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)