VU2LCI-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VU2LCI-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	WiFi*	BaudRate*
1787958484	0 Pkt	0 Pkt	0 Pkt	40 dB	0 bps
1787957764	0 Pkt	0 Pkt	0 Pkt	40 dB	0 bps
1787957044	0 Pkt	0 Pkt	0 Pkt	40 dB	0 bps
1787956488	0 Pkt	0 Pkt	0 Pkt	40 dB	0 bps
1787956467	0 Pkt	0 Pkt	0 Pkt	41 dB	0 bps
1787956445	0 Pkt	0 Pkt	0 Pkt	40 dB	0 bps
1787956376	0 Pkt	0 Pkt	0 Pkt	41 dB	0 bps
1787956358	0 Pkt	0 Pkt	0 Pkt	41 dB	0 bps
1787956324	0 Pkt	0 Pkt	0 Pkt	41 dB	0 bps
1787955604	0 Pkt	0 Pkt	0 Pkt	40 dB	0 bps
1787954884	0 Pkt	0 Pkt	0 Pkt	41 dB	0 bps
1787954164	0 Pkt	0 Pkt	0 Pkt	40 dB	0 bps
1787953444	0 Pkt	0 Pkt	0 Pkt	41 dB	0 bps
1787952724	0 Pkt	0 Pkt	0 Pkt	40 dB	0 bps
1787952004	0 Pkt	0 Pkt	0 Pkt	39 dB	0 bps
1787951284	0 Pkt	0 Pkt	0 Pkt	39 dB	0 bps
1787950564	0 Pkt	0 Pkt	0 Pkt	39 dB	0 bps
1787949844	0 Pkt	0 Pkt	0 Pkt	39 dB	0 bps
1787949124	0 Pkt	0 Pkt	0 Pkt	39 dB	0 bps
1787948404	0 Pkt	0 Pkt	0 Pkt	41 dB	0 bps
1787948057	0 Pkt	0 Pkt	0 Pkt	41 dB	0 bps
1787948035	0 Pkt	0 Pkt	0 Pkt	41 dB	0 bps
1787948000	0 Pkt	0 Pkt	0 Pkt	41 dB	0 bps
1787947684	0 Pkt	0 Pkt	0 Pkt	37 dB	0 bps
1787946964	0 Pkt	0 Pkt	0 Pkt	41 dB	0 bps

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

WiFi: 0, 1, 100

BaudRate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)