SA0AZS-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SA0AZS-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1776845678	0.69 Load	50.31 DegC	95 Mb	10356 Pkt	933 Pkt
1776844775	0.76 Load	49.77 DegC	95 Mb	10223 Pkt	944 Pkt
1776843875	0.7 Load	49.77 DegC	95 Mb	10504 Pkt	935 Pkt
1776842974	0.74 Load	49.77 DegC	95 Mb	10037 Pkt	927 Pkt
1776842074	0.83 Load	49.77 DegC	95 Mb	10889 Pkt	947 Pkt
1776841175	0.72 Load	49.77 DegC	95 Mb	10560 Pkt	940 Pkt
1776840274	0.75 Load	49.77 DegC	96 Mb	10193 Pkt	912 Pkt
1776839374	0.77 Load	48.69 DegC	95 Mb	9858 Pkt	917 Pkt
1776838486	0.73 Load	49.77 DegC	95 Mb	10410 Pkt	923 Pkt
1776837575	0.73 Load	48.69 DegC	95 Mb	10041 Pkt	914 Pkt
1776836675	0.74 Load	49.77 DegC	95 Mb	10093 Pkt	916 Pkt
1776835775	0.79 Load	48.69 DegC	96 Mb	10310 Pkt	928 Pkt
1776834875	0.81 Load	48.69 DegC	95 Mb	11555 Pkt	940 Pkt
1776833974	0.76 Load	49.23 DegC	95 Mb	11435 Pkt	948 Pkt
1776833074	0.74 Load	48.69 DegC	95 Mb	11059 Pkt	949 Pkt
1776832174	0.87 Load	48.69 DegC	95 Mb	10679 Pkt	932 Pkt
1776831280	0.73 Load	49.23 DegC	95 Mb	11188 Pkt	940 Pkt
1776830377	0.75 Load	48.69 DegC	95 Mb	10667 Pkt	961 Pkt
1776829474	0.95 Load	48.69 DegC	95 Mb	11549 Pkt	977 Pkt
1776828574	0.78 Load	48.69 DegC	95 Mb	11308 Pkt	966 Pkt
1776827675	0.73 Load	48.69 DegC	95 Mb	11520 Pkt	967 Pkt
1776826774	0.67 Load	48.69 DegC	95 Mb	11481 Pkt	977 Pkt
1776825875	0.78 Load	48.69 DegC	95 Mb	11932 Pkt	998 Pkt
1776824974	0.79 Load	48.69 DegC	95 Mb	12089 Pkt	992 Pkt
1776824074	0.87 Load	48.69 DegC	95 Mb	11511 Pkt	964 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)