Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object VU2RCY-14. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>
Time RF->INET* INET->RF* DigiRpt* TX2RF* DropRx*
1753515021 0 Pkts 0 Pkts 0 Pkts 1 Pkts 0 Pkts
1753492268 0 Pkts 0 Pkts 0 Pkts 6 Pkts 0 Pkts
1753491668 0 Pkts 0 Pkts 0 Pkts 1 Pkts 0 Pkts
1753459662 0 Pkts 0 Pkts 0 Pkts 1 Pkts 0 Pkts
1753458545 0 Pkts 0 Pkts 0 Pkts 3 Pkts 0 Pkts
1753457945 0 Pkts 0 Pkts 0 Pkts 3 Pkts 0 Pkts
1753457345 0 Pkts 0 Pkts 0 Pkts 6 Pkts 0 Pkts
1753456145 0 Pkts 0 Pkts 0 Pkts 3 Pkts 0 Pkts
1753455544 0 Pkts 0 Pkts 0 Pkts 3 Pkts 0 Pkts
1753454944 0 Pkts 0 Pkts 0 Pkts 3 Pkts 0 Pkts
1753454345 0 Pkts 0 Pkts 0 Pkts 4 Pkts 0 Pkts
1753453745 0 Pkts 0 Pkts 0 Pkts 6 Pkts 0 Pkts
1753453144 0 Pkts 0 Pkts 0 Pkts 1 Pkts 0 Pkts
1753453045 0 Pkts 0 Pkts 0 Pkts 3 Pkts 0 Pkts
1753452445 0 Pkts 0 Pkts 0 Pkts 6 Pkts 0 Pkts
1753451845 0 Pkts 0 Pkts 0 Pkts 1 Pkts 0 Pkts
1753342431 0 Pkts 0 Pkts 0 Pkts 3 Pkts 0 Pkts
1753341831 0 Pkts 0 Pkts 0 Pkts 6 Pkts 0 Pkts
1753341231 0 Pkts 0 Pkts 0 Pkts 1 Pkts 0 Pkts
1753201309 0 Pkts 0 Pkts 0 Pkts 3 Pkts 0 Pkts
1753200709 0 Pkts 0 Pkts 0 Pkts 3 Pkts 0 Pkts
1753200109 0 Pkts 0 Pkts 0 Pkts 3 Pkts 0 Pkts
1753199509 0 Pkts 0 Pkts 0 Pkts 6 Pkts 0 Pkts
1753198194 0 Pkts 0 Pkts 0 Pkts 1 Pkts 0 Pkts
1752909434 0 Pkts 0 Pkts 0 Pkts 3 Pkts 0 Pkts
*Used Equation Coefficients:
RF->INET: 0, 1, 0
INET->RF: 0, 1, 0
DigiRpt: 0, 1, 0
TX2RF: 0, 1, 0
DropRx: 0, 1, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)