9A2RI-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A2RI-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1784784061	13.75 Volt	580 Pkt	190 Pkt	58 Pcnt
1784783159	13.83 Volt	580 Pkt	200 Pkt	56 Pcnt
1784782258	13.83 Volt	590 Pkt	210 Pkt	58 Pcnt
1784781357	13.83 Volt	590 Pkt	220 Pkt	58 Pcnt
1784780456	13.83 Volt	580 Pkt	220 Pkt	57 Pcnt
1784779555	13.83 Volt	640 Pkt	230 Pkt	60 Pcnt
1784778654	13.83 Volt	700 Pkt	240 Pkt	62 Pcnt
1784777753	13.83 Volt	730 Pkt	250 Pkt	64 Pcnt
1784776853	13.83 Volt	750 Pkt	250 Pkt	65 Pcnt
1784775954	13.83 Volt	710 Pkt	240 Pkt	65 Pcnt
1784775053	13.83 Volt	670 Pkt	230 Pkt	65 Pcnt
1784774151	13.83 Volt	640 Pkt	230 Pkt	64 Pcnt
1784773251	13.67 Volt	610 Pkt	220 Pkt	63 Pcnt
1784772348	13.83 Volt	680 Pkt	240 Pkt	65 Pcnt
1784771447	13.83 Volt	730 Pkt	240 Pkt	65 Pcnt
1784770546	13.75 Volt	800 Pkt	250 Pkt	66 Pcnt
1784769647	13.83 Volt	850 Pkt	250 Pkt	68 Pcnt
1784768744	13.83 Volt	830 Pkt	240 Pkt	65 Pcnt
1784767847	13.83 Volt	810 Pkt	230 Pkt	65 Pcnt
1784766943	13.83 Volt	830 Pkt	220 Pkt	67 Pcnt
1784766043	13.9 Volt	890 Pkt	240 Pkt	71 Pcnt
1784765149	13.9 Volt	900 Pkt	230 Pkt	75 Pcnt
1784764242	13.9 Volt	940 Pkt	240 Pkt	76 Pcnt
1784763339	13.9 Volt	890 Pkt	240 Pkt	73 Pcnt
1784762439	13.9 Volt	830 Pkt	230 Pkt	70 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)