IK8WEC-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IK8WEC-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	DgR*
1776682533	12.9 Volt	210 Pkt	50 Pkt	83 Pcnt	35.62 Pcnt
1776682531	12.9 Volt	210 Pkt	50 Pkt	83 Pcnt	35.62 Pcnt
1776678933	12.9 Volt	190 Pkt	50 Pkt	92 Pcnt	35.65 Pcnt
1776678931	12.9 Volt	190 Pkt	50 Pkt	92 Pcnt	35.65 Pcnt
1776675334	12.9 Volt	170 Pkt	50 Pkt	90 Pcnt	35.67 Pcnt
1776675331	12.9 Volt	170 Pkt	50 Pkt	90 Pcnt	35.67 Pcnt
1776671733	12.9 Volt	140 Pkt	40 Pkt	92 Pcnt	35.68 Pcnt
1776671731	12.9 Volt	140 Pkt	40 Pkt	92 Pcnt	35.68 Pcnt
1776668133	12.9 Volt	160 Pkt	50 Pkt	93 Pcnt	35.7 Pcnt
1776668132	12.9 Volt	160 Pkt	50 Pkt	93 Pcnt	35.7 Pcnt
1776664536	12.9 Volt	160 Pkt	70 Pkt	82 Pcnt	35.71 Pcnt
1776664532	12.9 Volt	160 Pkt	70 Pkt	82 Pcnt	35.71 Pcnt
1776660932	12.9 Volt	90 Pkt	50 Pkt	82 Pcnt	35.7 Pcnt
1776657336	12.9 Volt	100 Pkt	50 Pkt	88 Pcnt	35.68 Pcnt
1776657332	12.9 Volt	100 Pkt	50 Pkt	88 Pcnt	35.68 Pcnt
1776653732	12.9 Volt	80 Pkt	40 Pkt	97 Pcnt	35.66 Pcnt
1776650132	12.9 Volt	80 Pkt	40 Pkt	97 Pcnt	35.65 Pcnt
1776646532	12.9 Volt	80 Pkt	40 Pkt	93 Pcnt	35.63 Pcnt
1776642932	12.9 Volt	100 Pkt	50 Pkt	99 Pcnt	35.62 Pcnt
1776639333	12.9 Volt	100 Pkt	50 Pkt	99 Pcnt	35.59 Pcnt
1776635736	12.9 Volt	90 Pkt	50 Pkt	98 Pcnt	35.57 Pcnt
1776635733	12.9 Volt	90 Pkt	50 Pkt	98 Pcnt	35.57 Pcnt
1776632136	12.9 Volt	100 Pkt	40 Pkt	92 Pcnt	35.55 Pcnt
1776632133	12.9 Volt	100 Pkt	40 Pkt	92 Pcnt	35.55 Pcnt
1776628535	12.9 Volt	100 Pkt	40 Pkt	98 Pcnt	35.55 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

DgR: 0, 0.001, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)