E21TMW-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E21TMW-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	WiFi*	BaudRate*
1765545991	2 Pkt	1 Pkt	1 Pkt	47 dB	19200 bps
1765545384	1 Pkt	0 Pkt	0 Pkt	46 dB	19200 bps
1765544784	2 Pkt	1 Pkt	0 Pkt	47 dB	19200 bps
1765544185	0 Pkt	0 Pkt	0 Pkt	47 dB	19200 bps
1765543584	1 Pkt	1 Pkt	0 Pkt	46 dB	19200 bps
1765542984	2 Pkt	1 Pkt	1 Pkt	47 dB	19200 bps
1765542384	0 Pkt	0 Pkt	0 Pkt	46 dB	19200 bps
1765541784	2 Pkt	0 Pkt	0 Pkt	47 dB	19200 bps
1765541184	2 Pkt	1 Pkt	1 Pkt	47 dB	19200 bps
1765540584	1 Pkt	0 Pkt	0 Pkt	47 dB	19200 bps
1765540002	7 Pkt	7 Pkt	5 Pkt	47 dB	19200 bps
1765539384	2 Pkt	1 Pkt	1 Pkt	47 dB	19200 bps
1765538784	1 Pkt	0 Pkt	0 Pkt	47 dB	19200 bps
1765538184	2 Pkt	1 Pkt	1 Pkt	47 dB	19200 bps
1765537584	2 Pkt	0 Pkt	0 Pkt	47 dB	19200 bps
1765536984	0 Pkt	0 Pkt	0 Pkt	46 dB	19200 bps
1765536384	1 Pkt	1 Pkt	1 Pkt	47 dB	19200 bps
1765535784	1 Pkt	1 Pkt	1 Pkt	47 dB	19200 bps
1765535184	0 Pkt	0 Pkt	0 Pkt	47 dB	19200 bps
1765534584	2 Pkt	1 Pkt	1 Pkt	47 dB	19200 bps
1765533984	2 Pkt	1 Pkt	1 Pkt	49 dB	19200 bps
1765533384	1 Pkt	0 Pkt	0 Pkt	48 dB	19200 bps
1765532184	2 Pkt	1 Pkt	1 Pkt	49 dB	19200 bps
1765531584	1 Pkt	0 Pkt	0 Pkt	49 dB	19200 bps
1765530984	1 Pkt	1 Pkt	1 Pkt	48 dB	19200 bps

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

WiFi: 0, 1, 100

BaudRate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)