WC4PEM-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WC4PEM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Vin*	Dg1h*	Rx1h*	Eff1h*
1780897845	29 C	14.33 Volt	350 Pkt	1280 Pkt	62 Pcnt
1780897844	29 C	14.33 Volt	350 Pkt	1280 Pkt	62 Pcnt
1780897544	29 C	14.33 Volt	350 Pkt	1260 Pkt	62 Pcnt
1780897245	29 C	14.33 Volt	350 Pkt	1240 Pkt	62 Pcnt
1780897244	29 C	14.33 Volt	350 Pkt	1240 Pkt	62 Pcnt
1780896944	29 C	14.33 Volt	350 Pkt	1240 Pkt	61 Pcnt
1780896644	29 C	14.33 Volt	340 Pkt	1260 Pkt	62 Pcnt
1780896644	29 C	14.33 Volt	340 Pkt	1260 Pkt	62 Pcnt
1780896344	29 C	14.33 Volt	350 Pkt	1280 Pkt	62 Pcnt
1780896044	29.5 C	14.33 Volt	350 Pkt	1290 Pkt	62 Pcnt
1780896044	29.5 C	14.33 Volt	350 Pkt	1290 Pkt	62 Pcnt
1780895744	29 C	14.33 Volt	350 Pkt	1270 Pkt	62 Pcnt
1780895445	29 C	14.33 Volt	340 Pkt	1260 Pkt	61 Pcnt
1780895444	29 C	14.33 Volt	340 Pkt	1260 Pkt	61 Pcnt
1780895144	29 C	14.18 Volt	340 Pkt	1260 Pkt	61 Pcnt
1780894844	29 C	14.33 Volt	340 Pkt	1240 Pkt	60 Pcnt
1780894844	29 C	14.33 Volt	340 Pkt	1240 Pkt	60 Pcnt
1780894544	29 C	14.18 Volt	350 Pkt	1260 Pkt	60 Pcnt
1780894244	28.5 C	14.33 Volt	350 Pkt	1260 Pkt	60 Pcnt
1780894244	28.5 C	14.33 Volt	350 Pkt	1260 Pkt	60 Pcnt
1780893944	29 C	14.33 Volt	350 Pkt	1260 Pkt	60 Pcnt
1780893644	29 C	14.18 Volt	340 Pkt	1270 Pkt	60 Pcnt
1780893644	29 C	14.18 Volt	340 Pkt	1270 Pkt	60 Pcnt
1780893344	28.5 C	14.33 Volt	340 Pkt	1260 Pkt	60 Pcnt
1780893045	28.5 C	14.25 Volt	340 Pkt	1260 Pkt	60 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

Dg1h: 0, 10, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)