SQ6ROK-FM Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ6ROK-FM. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1772691605	53 Deg.C	2 %
1772691002	54 Deg.C	2 %
1772690405	55 Deg.C	2 %
1772689802	53 Deg.C	2 %
1772689205	54 Deg.C	2 %
1772688602	53 Deg.C	2 %
1772688002	54 Deg.C	2 %
1772687405	54 Deg.C	2 %
1772686802	55 Deg.C	2 %
1772686216	53 Deg.C	2 %
1772685601	53 Deg.C	2 %
1772685005	53 Deg.C	2 %
1772684402	53 Deg.C	2 %
1772683801	53 Deg.C	2 %
1772683205	53 Deg.C	2 %
1772682601	53 Deg.C	2 %
1772682005	54 Deg.C	2 %
1772681428	53 Deg.C	2 %
1772680805	53 Deg.C	2 %
1772680201	52 Deg.C	2 %
1772679602	53 Deg.C	2 %
1772679005	54 Deg.C	2 %
1772678402	53 Deg.C	2 %
1772677805	53 Deg.C	2 %
1772677202	53 Deg.C	2 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)