IZ2BKS-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ2BKS-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp.in*	Hum*	QNH*	Temp.out*
1789917430	0 C deg	53 %	1024.4 hPa	28 C deg
1789915600	0 C deg	53 %	1024.4 hPa	28 C deg
1789913770	0 C deg	53 %	1024.4 hPa	28 C deg
1789911940	0 C deg	53 %	1024.4 hPa	28 C deg
1789910109	0 C deg	52 %	1024.4 hPa	27.9 C deg
1789909839	0 C deg	52 %	1024.4 hPa	27.9 C deg
1789909539	0 C deg	54 %	1024.7 hPa	28.2 C deg
1789909239	0 C deg	52 %	1024.4 hPa	27.9 C deg
1789908939	0 C deg	53 %	1024.4 hPa	27.8 C deg
1789908639	0 C deg	52 %	1024.7 hPa	28.6 C deg
1789908339	0 C deg	53 %	1024.7 hPa	28.5 C deg
1789908279	0 C deg	54 %	1024.7 hPa	28.2 C deg
1789908039	0 C deg	54 %	1024.7 hPa	28.2 C deg
1789907739	0 C deg	53 %	1024.7 hPa	28.1 C deg
1789907439	0 C deg	53 %	1024.7 hPa	28.3 C deg
1789907139	0 C deg	54 %	1025.1 hPa	28.3 C deg
1789906839	0 C deg	54 %	1024.7 hPa	28.4 C deg
1789906539	0 C deg	54 %	1025.1 hPa	28.2 C deg
1789906449	0 C deg	55 %	1025.1 hPa	27.9 C deg
1789905939	0 C deg	55 %	1025.1 hPa	27.9 C deg
1789905639	0 C deg	56 %	1025.1 hPa	27.2 C deg
1789905338	0 C deg	56 %	1025.1 hPa	27.4 C deg
1789905039	0 C deg	55 %	1025.4 hPa	27.8 C deg
1789904739	0 C deg	55 %	1025.4 hPa	27.6 C deg
1789904619	0 C deg	53 %	1025.4 hPa	28.4 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)