SQ2TMC-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ2TMC-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1763113206	47 Deg.C	2 %
1763110802	47 Deg.C	2 %
1763110205	47 Deg.C	2 %
1763107806	47 Deg.C	2 %
1763107202	47 Deg.C	2 %
1763104806	47 Deg.C	2 %
1763104202	47 Deg.C	2 %
1763103002	47 Deg.C	2 %
1763102401	47 Deg.C	2 %
1763101202	47 Deg.C	2 %
1763097605	47 Deg.C	2 %
1763097001	48 Deg.C	2 %
1763095802	47 Deg.C	2 %
1763094602	47 Deg.C	2 %
1763094002	47 Deg.C	2 %
1763093415	47 Deg.C	2 %
1763091602	47 Deg.C	2 %
1763091005	46 Deg.C	2 %
1763090433	46 Deg.C	2 %
1763089802	47 Deg.C	2 %
1763088601	46 Deg.C	2 %
1763088005	46 Deg.C	2 %
1763086202	46 Deg.C	2 %
1763084405	46 Deg.C	2 %
1763083802	46 Deg.C	2 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)