NI4CE-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object NI4CE-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Temp*	Rx1h*	Dg1h*	Eff1h*
1788655710	13.58 Volt	33 C	970 Pkt	270 Pkt	71 Pcnt
1788655413	13.65 Volt	33 C	960 Pkt	280 Pkt	70 Pcnt
1788655410	13.65 Volt	33 C	960 Pkt	280 Pkt	70 Pcnt
1788655110	13.95 Volt	33 C	960 Pkt	280 Pkt	70 Pcnt
1788654812	13.88 Volt	32.5 C	960 Pkt	280 Pkt	69 Pcnt
1788654810	13.88 Volt	32.5 C	960 Pkt	280 Pkt	69 Pcnt
1788654510	13.65 Volt	32 C	940 Pkt	290 Pkt	69 Pcnt
1788654213	14.03 Volt	32.5 C	930 Pkt	280 Pkt	68 Pcnt
1788654210	14.03 Volt	32.5 C	930 Pkt	280 Pkt	68 Pcnt
1788653910	14.25 Volt	32 C	930 Pkt	290 Pkt	68 Pcnt
1788653613	14.25 Volt	32 C	930 Pkt	290 Pkt	67 Pcnt
1788653610	14.25 Volt	32 C	930 Pkt	290 Pkt	67 Pcnt
1788653310	14.25 Volt	32 C	920 Pkt	280 Pkt	68 Pcnt
1788653013	14.25 Volt	32 C	910 Pkt	280 Pkt	68 Pcnt
1788653010	14.25 Volt	32 C	910 Pkt	280 Pkt	68 Pcnt
1788652710	14.25 Volt	32.5 C	900 Pkt	280 Pkt	68 Pcnt
1788652411	14.1 Volt	32.5 C	880 Pkt	270 Pkt	67 Pcnt
1788652410	14.1 Volt	32.5 C	880 Pkt	270 Pkt	67 Pcnt
1788652110	14.25 Volt	32.5 C	860 Pkt	270 Pkt	67 Pcnt
1788651813	14.25 Volt	32.5 C	850 Pkt	270 Pkt	67 Pcnt
1788651811	14.25 Volt	32.5 C	850 Pkt	270 Pkt	67 Pcnt
1788651511	14.25 Volt	32.5 C	830 Pkt	260 Pkt	67 Pcnt
1788651213	14.25 Volt	32.5 C	820 Pkt	260 Pkt	67 Pcnt
1788651211	14.25 Volt	32.5 C	820 Pkt	260 Pkt	67 Pcnt
1788650911	14.25 Volt	32 C	820 Pkt	260 Pkt	66 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Temp: 0, 0.5, -64

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)