DB0HDF Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0HDF. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1785284500	0.08 Rx Erlang	0.02 Tx Erlang	71 count/10m	5 count/10m	23 count/10m
1785283300	0.06 Rx Erlang	0.02 Tx Erlang	50 count/10m	1 count/10m	21 count/10m
1785282101	0.04 Rx Erlang	0.02 Tx Erlang	40 count/10m	0 count/10m	18 count/10m
1785280912	0.05 Rx Erlang	0.02 Tx Erlang	41 count/10m	0 count/10m	16 count/10m
1785279701	0.04 Rx Erlang	0.02 Tx Erlang	37 count/10m	3 count/10m	17 count/10m
1785278501	0.06 Rx Erlang	0.02 Tx Erlang	57 count/10m	0 count/10m	22 count/10m
1785277326	0.08 Rx Erlang	0.02 Tx Erlang	74 count/10m	6 count/10m	23 count/10m
1785276101	0.08 Rx Erlang	0.03 Tx Erlang	69 count/10m	0 count/10m	22 count/10m
1785274901	0.07 Rx Erlang	0.03 Tx Erlang	71 count/10m	4 count/10m	26 count/10m
1785273703	0.09 Rx Erlang	0.03 Tx Erlang	71 count/10m	0 count/10m	22 count/10m
1785272501	0.09 Rx Erlang	0.03 Tx Erlang	74 count/10m	3 count/10m	23 count/10m
1785271301	0.08 Rx Erlang	0.03 Tx Erlang	74 count/10m	0 count/10m	25 count/10m
1785270101	0.08 Rx Erlang	0.02 Tx Erlang	72 count/10m	0 count/10m	20 count/10m
1785268901	0.08 Rx Erlang	0.03 Tx Erlang	73 count/10m	0 count/10m	25 count/10m
1785267700	0.09 Rx Erlang	0.03 Tx Erlang	76 count/10m	6 count/10m	27 count/10m
1785266534	0.08 Rx Erlang	0.02 Tx Erlang	66 count/10m	0 count/10m	21 count/10m
1785265301	0.08 Rx Erlang	0.03 Tx Erlang	73 count/10m	0 count/10m	25 count/10m
1785264101	0.07 Rx Erlang	0.03 Tx Erlang	72 count/10m	0 count/10m	29 count/10m
1785262901	0.07 Rx Erlang	0.02 Tx Erlang	67 count/10m	3 count/10m	18 count/10m
1785261701	0.08 Rx Erlang	0.03 Tx Erlang	68 count/10m	0 count/10m	24 count/10m
1785260501	0.08 Rx Erlang	0.03 Tx Erlang	67 count/10m	6 count/10m	22 count/10m
1785259301	0.04 Rx Erlang	0.01 Tx Erlang	34 count/10m	0 count/10m	11 count/10m
1785258101	0.03 Rx Erlang	0.02 Tx Erlang	26 count/10m	0 count/10m	17 count/10m
1785256901	0.04 Rx Erlang	0.03 Tx Erlang	29 count/10m	0 count/10m	20 count/10m
1785255701	0.05 Rx Erlang	0.03 Tx Erlang	51 count/10m	1 count/10m	28 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)