Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object VU3TYG-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>
Time RxTraffic* TxTraffic* RxDrop* WiFi* BaudRate*
1753691475 0 Pkt 0 Pkt 0 Pkt 81 dB 1200 bps
1753690755 0 Pkt 0 Pkt 0 Pkt 80 dB 1200 bps
1753690035 0 Pkt 0 Pkt 0 Pkt 82 dB 1200 bps
1753689315 0 Pkt 0 Pkt 0 Pkt 78 dB 1200 bps
1753688595 0 Pkt 0 Pkt 0 Pkt 84 dB 1200 bps
1753687875 0 Pkt 0 Pkt 0 Pkt 84 dB 1200 bps
1753687155 0 Pkt 0 Pkt 0 Pkt 83 dB 1200 bps
1753686440 0 Pkt 0 Pkt 0 Pkt 82 dB 1200 bps
1753685714 0 Pkt 0 Pkt 0 Pkt 83 dB 1200 bps
1753684994 0 Pkt 0 Pkt 0 Pkt 82 dB 1200 bps
1753684274 0 Pkt 0 Pkt 0 Pkt 81 dB 1200 bps
1753683554 0 Pkt 0 Pkt 0 Pkt 82 dB 1200 bps
1753682834 0 Pkt 0 Pkt 0 Pkt 83 dB 1200 bps
1753682114 0 Pkt 0 Pkt 0 Pkt 84 dB 1200 bps
1753681394 0 Pkt 0 Pkt 0 Pkt 84 dB 1200 bps
1753680674 0 Pkt 0 Pkt 0 Pkt 77 dB 1200 bps
1753679954 0 Pkt 0 Pkt 0 Pkt 76 dB 1200 bps
1753679234 0 Pkt 0 Pkt 0 Pkt 82 dB 1200 bps
1753678514 0 Pkt 0 Pkt 0 Pkt 81 dB 1200 bps
1753677794 0 Pkt 0 Pkt 0 Pkt 82 dB 1200 bps
1753677074 0 Pkt 0 Pkt 0 Pkt 80 dB 1200 bps
1753676354 0 Pkt 0 Pkt 0 Pkt 81 dB 1200 bps
1753675634 0 Pkt 0 Pkt 0 Pkt 82 dB 1200 bps
1753674914 0 Pkt 0 Pkt 0 Pkt 85 dB 1200 bps
1753674194 0 Pkt 0 Pkt 0 Pkt 82 dB 1200 bps
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
WiFi: 0, 1, 100
BaudRate: 0, 1, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)