SP4WRZ-FM Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP4WRZ-FM. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1754077802	45 Deg.C	10 %
1754076602	42 Deg.C	10 %
1754076005	44 Deg.C	10 %
1754075402	45 Deg.C	10 %
1754074801	43 Deg.C	10 %
1754073602	45 Deg.C	10 %
1754072402	44 Deg.C	10 %
1754070005	46 Deg.C	10 %
1753995005	46 Deg.C	15 %
1753994402	46 Deg.C	15 %
1753993805	45 Deg.C	15 %
1753993202	47 Deg.C	15 %
1753990805	45 Deg.C	15 %
1753989605	45 Deg.C	16 %
1753988406	53 Deg.C	15 %
1753987202	53 Deg.C	15 %
1753986002	59 Deg.C	14 %
1753985405	58 Deg.C	14 %
1753984205	47 Deg.C	13 %
1753983602	47 Deg.C	13 %
1753982406	45 Deg.C	13 %
1753981802	45 Deg.C	13 %
1753980602	45 Deg.C	13 %
1753979402	45 Deg.C	13 %
1753977005	49 Deg.C	13 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)