BX4ACP-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BX4ACP-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	ALL_PKTS_10M*	FWD_APRS_10M*	POS_PKTS_10M*	MSG_PKTS_10M*	CTRL_PKTS_10M*
1784712167	34 cnt	0 cnt	27 cnt	2 cnt	5 cnt
1784711567	36 cnt	0 cnt	31 cnt	0 cnt	5 cnt
1784710967	32 cnt	0 cnt	26 cnt	2 cnt	4 cnt
1784710367	27 cnt	0 cnt	23 cnt	2 cnt	2 cnt
1784709767	37 cnt	0 cnt	34 cnt	0 cnt	3 cnt
1784709167	33 cnt	2 cnt	30 cnt	1 cnt	2 cnt
1784708567	31 cnt	1 cnt	24 cnt	1 cnt	6 cnt
1784707967	28 cnt	1 cnt	26 cnt	0 cnt	2 cnt
1784707367	37 cnt	0 cnt	32 cnt	1 cnt	4 cnt
1784706779	37 cnt	6 cnt	29 cnt	1 cnt	7 cnt
1784706167	37 cnt	3 cnt	33 cnt	0 cnt	4 cnt
1784705567	30 cnt	0 cnt	26 cnt	1 cnt	3 cnt
1784704967	31 cnt	0 cnt	27 cnt	0 cnt	4 cnt
1784704367	28 cnt	0 cnt	27 cnt	0 cnt	1 cnt
1784703767	40 cnt	1 cnt	36 cnt	1 cnt	3 cnt
1784703167	32 cnt	2 cnt	30 cnt	0 cnt	2 cnt
1784702567	32 cnt	0 cnt	28 cnt	0 cnt	4 cnt
1784701967	34 cnt	0 cnt	28 cnt	0 cnt	6 cnt
1784701367	28 cnt	0 cnt	23 cnt	2 cnt	3 cnt
1784700767	39 cnt	0 cnt	35 cnt	0 cnt	4 cnt
1784700167	31 cnt	0 cnt	28 cnt	1 cnt	2 cnt
1784699567	32 cnt	1 cnt	30 cnt	0 cnt	2 cnt
1784698967	23 cnt	0 cnt	22 cnt	0 cnt	1 cnt
1784698367	36 cnt	2 cnt	30 cnt	1 cnt	5 cnt
1784697767	35 cnt	1 cnt	28 cnt	0 cnt	7 cnt

*Used Equation Coefficients:

ALL_PKTS_10M: 0, 1, 0

FWD_APRS_10M: 0, 1, 0

POS_PKTS_10M: 0, 1, 0

MSG_PKTS_10M: 0, 1, 0

CTRL_PKTS_10M: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)