EUGENE Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EUGENE. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1784710193	13.73 Volt	360 Pkt	30 Pkt	67 Pcnt
1784709593	13.73 Volt	360 Pkt	30 Pkt	66 Pcnt
1784708993	13.73 Volt	360 Pkt	20 Pkt	66 Pcnt
1784708393	13.73 Volt	360 Pkt	20 Pkt	68 Pcnt
1784707793	13.8 Volt	350 Pkt	20 Pkt	68 Pcnt
1784707193	13.73 Volt	350 Pkt	20 Pkt	72 Pcnt
1784706593	13.73 Volt	360 Pkt	20 Pkt	77 Pcnt
1784705993	13.73 Volt	350 Pkt	20 Pkt	81 Pcnt
1784705393	13.8 Volt	360 Pkt	20 Pkt	85 Pcnt
1784704793	13.8 Volt	360 Pkt	30 Pkt	87 Pcnt
1784704193	13.73 Volt	360 Pkt	30 Pkt	90 Pcnt
1784703593	13.73 Volt	360 Pkt	30 Pkt	91 Pcnt
1784703008	13.8 Volt	350 Pkt	30 Pkt	90 Pcnt
1784702393	13.73 Volt	340 Pkt	30 Pkt	90 Pcnt
1784701793	13.73 Volt	360 Pkt	30 Pkt	89 Pcnt
1784701193	13.73 Volt	360 Pkt	30 Pkt	85 Pcnt
1784700593	13.73 Volt	380 Pkt	30 Pkt	81 Pcnt
1784699993	13.8 Volt	390 Pkt	30 Pkt	77 Pcnt
1784699393	13.73 Volt	400 Pkt	30 Pkt	71 Pcnt
1784698793	13.73 Volt	410 Pkt	30 Pkt	69 Pcnt
1784698193	13.73 Volt	450 Pkt	40 Pkt	70 Pcnt
1784697593	13.73 Volt	490 Pkt	50 Pkt	73 Pcnt
1784696993	13.73 Volt	520 Pkt	50 Pkt	77 Pcnt
1784696393	13.8 Volt	550 Pkt	60 Pkt	81 Pcnt
1784695793	13.73 Volt	560 Pkt	70 Pkt	83 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)