VU2CHR-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VU2CHR-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	WiFi*	BaudRate*
1773251428	89 dB	1200 bps
1773251127	90 dB	1200 bps
1773250827	89 dB	1200 bps
1773250527	89 dB	1200 bps
1773250228	89 dB	1200 bps
1773249930	89 dB	1200 bps
1773249628	89 dB	1200 bps
1773249327	89 dB	1200 bps
1773249028	90 dB	1200 bps
1773248728	90 dB	1200 bps
1773248428	89 dB	1200 bps
1773248128	89 dB	1200 bps
1773247828	89 dB	1200 bps
1773247528	89 dB	1200 bps
1773247227	89 dB	1200 bps
1773246927	89 dB	1200 bps
1773246628	89 dB	1200 bps
1773246328	90 dB	1200 bps
1773246029	90 dB	1200 bps
1773245728	89 dB	1200 bps
1773245427	89 dB	1200 bps
1773245127	90 dB	1200 bps
1773244828	89 dB	1200 bps
1773244527	89 dB	1200 bps
1773244228	90 dB	1200 bps

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

WiFi: 0, 1, 100

BaudRate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)