SR7KGO Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR7KGO. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1765552202	37 Deg.C	3 %
1765551605	37 Deg.C	3 %
1765551002	37 Deg.C	3 %
1765549801	37 Deg.C	3 %
1765549204	37 Deg.C	3 %
1765548602	38 Deg.C	3 %
1765548001	37 Deg.C	3 %
1765547405	37 Deg.C	3 %
1765546801	37 Deg.C	3 %
1765546205	37 Deg.C	3 %
1765545602	37 Deg.C	3 %
1765543802	38 Deg.C	3 %
1765543205	38 Deg.C	3 %
1765542601	37 Deg.C	3 %
1765541402	37 Deg.C	3 %
1765540201	37 Deg.C	3 %
1765539605	37 Deg.C	3 %
1765539001	37 Deg.C	3 %
1765538404	37 Deg.C	3 %
1765537802	37 Deg.C	3 %
1765537205	37 Deg.C	3 %
1765536601	37 Deg.C	3 %
1765536001	37 Deg.C	3 %
1765535405	37 Deg.C	3 %
1765534802	37 Deg.C	3 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)