WC4PEM-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WC4PEM-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Vin*	Dg1h*	Rx1h*	Eff1h*
1784671219	26.5 C	14.25 Volt	160 Pkt	430 Pkt	69 Pcnt
1784670919	26.5 C	14.25 Volt	160 Pkt	420 Pkt	70 Pcnt
1784670619	25.5 C	14.25 Volt	160 Pkt	430 Pkt	69 Pcnt
1784670319	25.5 C	14.25 Volt	160 Pkt	420 Pkt	70 Pcnt
1784670019	26 C	14.25 Volt	150 Pkt	430 Pkt	68 Pcnt
1784669719	26.5 C	14.25 Volt	150 Pkt	420 Pkt	67 Pcnt
1784669419	26 C	14.25 Volt	150 Pkt	410 Pkt	68 Pcnt
1784669119	25.5 C	14.25 Volt	140 Pkt	400 Pkt	68 Pcnt
1784668819	25.5 C	14.25 Volt	140 Pkt	400 Pkt	67 Pcnt
1784668519	26 C	14.25 Volt	140 Pkt	380 Pkt	66 Pcnt
1784668229	26.5 C	14.25 Volt	140 Pkt	390 Pkt	67 Pcnt
1784667919	26 C	14.25 Volt	140 Pkt	370 Pkt	65 Pcnt
1784667619	25 C	14.25 Volt	140 Pkt	370 Pkt	66 Pcnt
1784667319	26 C	14.25 Volt	140 Pkt	370 Pkt	65 Pcnt
1784667026	26 C	14.25 Volt	140 Pkt	390 Pkt	67 Pcnt
1784666719	26.5 C	14.25 Volt	140 Pkt	390 Pkt	67 Pcnt
1784666419	26.5 C	14.25 Volt	150 Pkt	400 Pkt	67 Pcnt
1784666119	26 C	14.25 Volt	150 Pkt	400 Pkt	68 Pcnt
1784665819	25.5 C	14.25 Volt	160 Pkt	410 Pkt	67 Pcnt
1784665519	26 C	14.25 Volt	150 Pkt	400 Pkt	68 Pcnt
1784665219	26.5 C	14.25 Volt	160 Pkt	400 Pkt	68 Pcnt
1784664919	27 C	14.25 Volt	160 Pkt	400 Pkt	68 Pcnt
1784664619	26.5 C	14.25 Volt	160 Pkt	420 Pkt	69 Pcnt
1784664319	25.5 C	14.25 Volt	160 Pkt	430 Pkt	69 Pcnt
1784664019	26 C	14.25 Volt	160 Pkt	420 Pkt	70 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

Dg1h: 0, 10, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)