HB9IPA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HB9IPA. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RxDir*	RxHop*	RxTot*	RxQry*	TxTot*
1777637740	9 pkt/15m	46 pkt/15m	55 pkt/15m	0 pkt/15m	10 pkt/15m
1777636835	11 pkt/15m	48 pkt/15m	59 pkt/15m	0 pkt/15m	12 pkt/15m
1777634130	16 pkt/15m	35 pkt/15m	51 pkt/15m	0 pkt/15m	10 pkt/15m
1777633243	20 pkt/15m	43 pkt/15m	63 pkt/15m	0 pkt/15m	12 pkt/15m
1777632338	12 pkt/15m	35 pkt/15m	47 pkt/15m	0 pkt/15m	11 pkt/15m
1777631427	9 pkt/15m	36 pkt/15m	45 pkt/15m	0 pkt/15m	8 pkt/15m
1777630541	13 pkt/15m	36 pkt/15m	49 pkt/15m	0 pkt/15m	10 pkt/15m
1777629633	20 pkt/15m	35 pkt/15m	55 pkt/15m	0 pkt/15m	10 pkt/15m
1777628747	13 pkt/15m	27 pkt/15m	40 pkt/15m	0 pkt/15m	8 pkt/15m
1777627838	10 pkt/15m	32 pkt/15m	42 pkt/15m	0 pkt/15m	7 pkt/15m
1777626930	16 pkt/15m	37 pkt/15m	53 pkt/15m	0 pkt/15m	10 pkt/15m
1777626044	11 pkt/15m	64 pkt/15m	75 pkt/15m	0 pkt/15m	19 pkt/15m
1777625138	14 pkt/15m	29 pkt/15m	43 pkt/15m	0 pkt/15m	7 pkt/15m
1777624227	8 pkt/15m	67 pkt/15m	75 pkt/15m	0 pkt/15m	6 pkt/15m
1777623342	19 pkt/15m	71 pkt/15m	90 pkt/15m	0 pkt/15m	21 pkt/15m
1777622433	21 pkt/15m	54 pkt/15m	75 pkt/15m	0 pkt/15m	19 pkt/15m
1777621549	11 pkt/15m	58 pkt/15m	69 pkt/15m	0 pkt/15m	6 pkt/15m
1777620637	10 pkt/15m	58 pkt/15m	68 pkt/15m	0 pkt/15m	7 pkt/15m
1777619730	20 pkt/15m	41 pkt/15m	61 pkt/15m	0 pkt/15m	11 pkt/15m
1777617937	6 pkt/15m	23 pkt/15m	29 pkt/15m	0 pkt/15m	2 pkt/15m

*Used Equation Coefficients:

RxDir: 0, 1, 0

RxHop: 0, 1, 0

RxTot: 0, 1, 0

RxQry: 0, 1, 0

TxTot: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)