YH0DVR-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YH0DVR-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1784674141	21 Pkt	0 Pkt	31 dBm	14.48 V
1784673767	17 Pkt	0 Pkt	31 dBm	14.48 V
1784673305	21 Pkt	0 Pkt	31 dBm	14.48 V
1784672930	19 Pkt	1 Pkt	31 dBm	14.48 V
1784672556	21 Pkt	0 Pkt	31 dBm	14.48 V
1784672182	20 Pkt	1 Pkt	31 dBm	14.48 V
1784671808	21 Pkt	0 Pkt	31 dBm	14.48 V
1784671435	12 Pkt	0 Pkt	31 dBm	14.48 V
1784671062	12 Pkt	0 Pkt	31 dBm	14.48 V
1784670689	20 Pkt	0 Pkt	31 dBm	14.48 V
1784670227	21 Pkt	0 Pkt	31 dBm	14.48 V
1784669855	13 Pkt	0 Pkt	31 dBm	14.48 V
1784669481	18 Pkt	0 Pkt	31 dBm	14.48 V
1784669107	17 Pkt	0 Pkt	31 dBm	14.48 V
1784668734	14 Pkt	0 Pkt	31 dBm	14.48 V
1784668361	20 Pkt	0 Pkt	31 dBm	14.48 V
1784667989	15 Pkt	0 Pkt	31 dBm	14.48 V
1784667615	20 Pkt	0 Pkt	31 dBm	14.48 V
1784667152	14 Pkt	0 Pkt	31 dBm	14.48 V
1784666405	19 Pkt	0 Pkt	31 dBm	14.48 V
1784666031	13 Pkt	0 Pkt	31 dBm	14.48 V
1784665658	17 Pkt	0 Pkt	31 dBm	14.48 V
1784665285	14 Pkt	0 Pkt	31 dBm	14.48 V
1784664911	16 Pkt	0 Pkt	31 dBm	14.48 V
1784664538	22 Pkt	0 Pkt	31 dBm	14.48 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)