EA5DHO-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EA5DHO-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1765634216	0 Count	959 Count	0 Count	0 VDC	0 VDC
1765633076	0 Count	959 Count	0 Count	0 VDC	0 VDC
1765631936	0 Count	959 Count	0 Count	0 VDC	0 VDC
1765630796	0 Count	959 Count	0 Count	0 VDC	0 VDC
1765629656	0 Count	959 Count	0 Count	0 VDC	0 VDC
1765628516	0 Count	959 Count	0 Count	0 VDC	0 VDC
1765627376	0 Count	952 Count	0 Count	0 VDC	0 VDC
1765626236	0 Count	951 Count	0 Count	0 VDC	0 VDC
1765625096	0 Count	937 Count	0 Count	0 VDC	0 VDC
1765623956	0 Count	900 Count	0 Count	0 VDC	0 VDC
1765622816	0 Count	858 Count	0 Count	0 VDC	0 VDC
1765621676	0 Count	794 Count	0 Count	0 VDC	0 VDC
1765620535	0 Count	726 Count	0 Count	0 VDC	0 VDC
1765619395	0 Count	667 Count	0 Count	0 VDC	0 VDC
1765618255	0 Count	594 Count	0 Count	0 VDC	0 VDC
1765617115	0 Count	543 Count	0 Count	0 VDC	0 VDC
1765615975	0 Count	528 Count	0 Count	0 VDC	0 VDC
1765614835	0 Count	526 Count	0 Count	0 VDC	0 VDC
1765613695	0 Count	489 Count	0 Count	0 VDC	0 VDC
1765613399	0 Count	479 Count	0 Count	0 VDC	0 VDC
1765612290	0 Count	479 Count	0 Count	0 VDC	0 VDC
1765611133	0 Count	462 Count	0 Count	0 VDC	0 VDC
1765609993	0 Count	462 Count	0 Count	0 VDC	0 VDC
1765608853	0 Count	462 Count	0 Count	0 VDC	0 VDC
1765607713	0 Count	462 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)