W7JFO-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W7JFO-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1780566392	13.2 Volt	190 Pkt	30 Pkt	62 Pcnt	18.5 C
1780564592	13.2 Volt	190 Pkt	40 Pkt	58 Pcnt	18 C
1780562792	13.2 Volt	180 Pkt	40 Pkt	59 Pcnt	18 C
1780562788	13.2 Volt	180 Pkt	40 Pkt	59 Pcnt	18 C
1780560993	13.2 Volt	190 Pkt	40 Pkt	61 Pcnt	18 C
1780559198	13.2 Volt	190 Pkt	40 Pkt	58 Pcnt	18 C
1780557395	13.2 Volt	190 Pkt	40 Pkt	59 Pcnt	18 C
1780555593	13.2 Volt	210 Pkt	40 Pkt	67 Pcnt	18 C
1780553791	13.2 Volt	210 Pkt	40 Pkt	71 Pcnt	18 C
1780551992	13.2 Volt	210 Pkt	40 Pkt	72 Pcnt	18.5 C
1780550192	13.2 Volt	190 Pkt	30 Pkt	75 Pcnt	18.5 C
1780548989	13.2 Volt	190 Pkt	30 Pkt	78 Pcnt	18.5 C
1780546592	13.2 Volt	190 Pkt	30 Pkt	76 Pcnt	19 C
1780544799	13.2 Volt	180 Pkt	30 Pkt	71 Pcnt	18.5 C
1780542992	13.2 Volt	190 Pkt	30 Pkt	82 Pcnt	18.5 C
1780542089	13.2 Volt	200 Pkt	30 Pkt	86 Pcnt	18.5 C
1780541192	13.2 Volt	190 Pkt	30 Pkt	87 Pcnt	19 C
1780539392	13.2 Volt	190 Pkt	40 Pkt	86 Pcnt	19.5 C
1780537592	13.2 Volt	190 Pkt	40 Pkt	86 Pcnt	19.5 C
1780535792	13.2 Volt	210 Pkt	40 Pkt	85 Pcnt	19 C
1780535189	13.2 Volt	220 Pkt	40 Pkt	85 Pcnt	19.5 C
1780533992	13.2 Volt	220 Pkt	40 Pkt	86 Pcnt	19 C
1780532192	13.2 Volt	220 Pkt	40 Pkt	87 Pcnt	19.5 C
1780530392	13.2 Volt	250 Pkt	40 Pkt	92 Pcnt	19 C
1780528592	13.2 Volt	320 Pkt	40 Pkt	91 Pcnt	19 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)