SR6NWS Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR6NWS. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1776656834	12.15 Volt	190 Pkt	20 Pkt	21 Pcnt
1776656833	12.15 Volt	190 Pkt	20 Pkt	21 Pcnt
1776655933	12.15 Volt	190 Pkt	20 Pkt	22 Pcnt
1776655034	12.15 Volt	170 Pkt	20 Pkt	21 Pcnt
1776655033	12.15 Volt	170 Pkt	20 Pkt	21 Pcnt
1776654133	12.15 Volt	170 Pkt	20 Pkt	22 Pcnt
1776653234	12.15 Volt	160 Pkt	10 Pkt	22 Pcnt
1776653233	12.15 Volt	160 Pkt	10 Pkt	22 Pcnt
1776652333	12.15 Volt	160 Pkt	10 Pkt	22 Pcnt
1776651434	12.15 Volt	170 Pkt	20 Pkt	23 Pcnt
1776651434	12.15 Volt	170 Pkt	20 Pkt	23 Pcnt
1776650533	12.15 Volt	160 Pkt	20 Pkt	21 Pcnt
1776649634	12.15 Volt	150 Pkt	10 Pkt	19 Pcnt
1776649633	12.15 Volt	150 Pkt	10 Pkt	19 Pcnt
1776648734	12.15 Volt	150 Pkt	10 Pkt	20 Pcnt
1776647834	12.15 Volt	160 Pkt	10 Pkt	20 Pcnt
1776647834	12.15 Volt	160 Pkt	10 Pkt	20 Pcnt
1776646934	12.15 Volt	170 Pkt	10 Pkt	21 Pcnt
1776646034	12.15 Volt	180 Pkt	20 Pkt	22 Pcnt
1776646034	12.15 Volt	180 Pkt	20 Pkt	22 Pcnt
1776645134	12.15 Volt	190 Pkt	20 Pkt	24 Pcnt
1776644235	12.15 Volt	190 Pkt	20 Pkt	23 Pcnt
1776644234	12.15 Volt	190 Pkt	20 Pkt	23 Pcnt
1776643334	12.15 Volt	200 Pkt	10 Pkt	25 Pcnt
1776642435	12.15 Volt	190 Pkt	10 Pkt	24 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

T_ext: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)