N1KSC-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N1KSC-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1785319034	14.25 Volt	1060 Pkt	140 Pkt	64 Pcnt
1785318727	14.25 Volt	1060 Pkt	140 Pkt	65 Pcnt
1785318430	14.25 Volt	1050 Pkt	140 Pkt	65 Pcnt
1785318129	14.25 Volt	1040 Pkt	150 Pkt	64 Pcnt
1785317836	14.25 Volt	1010 Pkt	150 Pkt	62 Pcnt
1785317529	14.25 Volt	980 Pkt	140 Pkt	61 Pcnt
1785317230	14.25 Volt	980 Pkt	140 Pkt	62 Pcnt
1785316930	14.25 Volt	980 Pkt	140 Pkt	63 Pcnt
1785316630	14.25 Volt	960 Pkt	140 Pkt	62 Pcnt
1785316330	14.25 Volt	930 Pkt	140 Pkt	62 Pcnt
1785316022	14.25 Volt	910 Pkt	130 Pkt	60 Pcnt
1785315721	14.25 Volt	910 Pkt	130 Pkt	60 Pcnt
1785315435	14.25 Volt	910 Pkt	130 Pkt	59 Pcnt
1785315122	14.1 Volt	890 Pkt	130 Pkt	59 Pcnt
1785314833	14.25 Volt	910 Pkt	140 Pkt	60 Pcnt
1785314531	14.25 Volt	900 Pkt	130 Pkt	59 Pcnt
1785314219	14.25 Volt	890 Pkt	140 Pkt	59 Pcnt
1785313920	14.25 Volt	890 Pkt	140 Pkt	58 Pcnt
1785313634	14.25 Volt	900 Pkt	130 Pkt	58 Pcnt
1785313321	14.25 Volt	900 Pkt	130 Pkt	58 Pcnt
1785313019	14.25 Volt	920 Pkt	130 Pkt	59 Pcnt
1785312728	14.25 Volt	930 Pkt	130 Pkt	59 Pcnt
1785312438	14.25 Volt	950 Pkt	140 Pkt	60 Pcnt
1785312122	14.03 Volt	950 Pkt	140 Pkt	61 Pcnt
1785311817	13.88 Volt	930 Pkt	140 Pkt	61 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)