SKING Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SKING. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1776685872	12.48 Volt	350 Pkt	40 Pkt	94 Pcnt
1776685272	12.32 Volt	360 Pkt	40 Pkt	93 Pcnt
1776684672	12.48 Volt	360 Pkt	40 Pkt	93 Pcnt
1776684072	12.48 Volt	350 Pkt	40 Pkt	91 Pcnt
1776683472	12.48 Volt	360 Pkt	40 Pkt	90 Pcnt
1776682872	12.48 Volt	360 Pkt	40 Pkt	88 Pcnt
1776682272	12.48 Volt	360 Pkt	40 Pkt	89 Pcnt
1776681672	12.25 Volt	350 Pkt	30 Pkt	89 Pcnt
1776681072	12.48 Volt	350 Pkt	40 Pkt	90 Pcnt
1776680472	12.48 Volt	370 Pkt	40 Pkt	91 Pcnt
1776679872	12.32 Volt	370 Pkt	40 Pkt	92 Pcnt
1776679272	12.48 Volt	380 Pkt	40 Pkt	93 Pcnt
1776678672	12.56 Volt	380 Pkt	40 Pkt	92 Pcnt
1776678072	12.32 Volt	380 Pkt	40 Pkt	93 Pcnt
1776677472	12.48 Volt	360 Pkt	40 Pkt	92 Pcnt
1776676873	12.48 Volt	360 Pkt	40 Pkt	92 Pcnt
1776676273	12.48 Volt	360 Pkt	40 Pkt	93 Pcnt
1776675673	12.48 Volt	360 Pkt	40 Pkt	92 Pcnt
1776675073	12.48 Volt	360 Pkt	40 Pkt	93 Pcnt
1776674473	12.4 Volt	360 Pkt	40 Pkt	93 Pcnt
1776673873	12.48 Volt	390 Pkt	40 Pkt	92 Pcnt
1776673273	12.48 Volt	380 Pkt	40 Pkt	92 Pcnt
1776672673	12.4 Volt	370 Pkt	40 Pkt	92 Pcnt
1776672073	12.56 Volt	370 Pkt	40 Pkt	92 Pcnt
1776671473	12.48 Volt	370 Pkt	40 Pkt	91 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)