EL-IZ8LYA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-IZ8LYA. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1753789201	0 RX Erlang	4 TX Erlang	0 RXcount/10m	1 TXcount/10m
1753788002	0 RX Erlang	87 TX Erlang	0 RXcount/10m	8 TXcount/10m
1753786201	0 RX Erlang	14 TX Erlang	0 RXcount/10m	2 TXcount/10m
1753785602	0 RX Erlang	15 TX Erlang	0 RXcount/10m	4 TXcount/10m
1753784401	0 RX Erlang	7 TX Erlang	0 RXcount/10m	1 TXcount/10m
1753783201	0 RX Erlang	46 TX Erlang	0 RXcount/10m	7 TXcount/10m
1753782601	0 RX Erlang	15 TX Erlang	0 RXcount/10m	2 TXcount/10m
1753782001	0 RX Erlang	8 TX Erlang	0 RXcount/10m	2 TXcount/10m
1753781401	0 RX Erlang	16 TX Erlang	0 RXcount/10m	4 TXcount/10m
1753780801	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1753780202	0 RX Erlang	18 TX Erlang	0 RXcount/10m	3 TXcount/10m
1753779002	0 RX Erlang	40 TX Erlang	0 RXcount/10m	5 TXcount/10m
1753778401	0 RX Erlang	372 TX Erlang	0 RXcount/10m	5 TXcount/10m
1753777802	0 RX Erlang	823 TX Erlang	0 RXcount/10m	13 TXcount/10m
1753777202	0 RX Erlang	195 TX Erlang	0 RXcount/10m	5 TXcount/10m
1753776602	0 RX Erlang	795 TX Erlang	0 RXcount/10m	19 TXcount/10m
1753776016	0 RX Erlang	865 TX Erlang	0 RXcount/10m	19 TXcount/10m
1753775402	0 RX Erlang	672 TX Erlang	0 RXcount/10m	17 TXcount/10m
1753774801	0 RX Erlang	851 TX Erlang	0 RXcount/10m	19 TXcount/10m
1753774201	0 RX Erlang	406 TX Erlang	0 RXcount/10m	12 TXcount/10m
1753773601	0 RX Erlang	31 TX Erlang	0 RXcount/10m	5 TXcount/10m
1753773002	0 RX Erlang	13 TX Erlang	0 RXcount/10m	3 TXcount/10m
1753772402	0 RX Erlang	23 TX Erlang	0 RXcount/10m	3 TXcount/10m
1753771801	0 RX Erlang	6 TX Erlang	0 RXcount/10m	1 TXcount/10m
1753771201	0 RX Erlang	66 TX Erlang	0 RXcount/10m	10 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)