WC4PEM-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WC4PEM-6. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Vin*	Dg1h*	Rx1h*	Eff1h*
1784670541	27 C	14.33 Volt	270 Pkt	920 Pkt	69 Pcnt
1784670540	27 C	14.33 Volt	270 Pkt	920 Pkt	69 Pcnt
1784670240	26.5 C	14.33 Volt	270 Pkt	920 Pkt	69 Pcnt
1784669941	27.5 C	14.33 Volt	260 Pkt	910 Pkt	70 Pcnt
1784669940	27.5 C	14.33 Volt	260 Pkt	910 Pkt	70 Pcnt
1784669640	27.5 C	14.33 Volt	260 Pkt	900 Pkt	70 Pcnt
1784669341	26.5 C	14.33 Volt	260 Pkt	910 Pkt	71 Pcnt
1784669340	26.5 C	14.33 Volt	260 Pkt	910 Pkt	71 Pcnt
1784669040	27.5 C	14.33 Volt	260 Pkt	900 Pkt	71 Pcnt
1784668741	28 C	14.33 Volt	250 Pkt	890 Pkt	70 Pcnt
1784668740	28 C	14.33 Volt	250 Pkt	890 Pkt	70 Pcnt
1784668440	27 C	14.33 Volt	260 Pkt	890 Pkt	71 Pcnt
1784668141	26.5 C	14.33 Volt	260 Pkt	880 Pkt	71 Pcnt
1784668140	26.5 C	14.33 Volt	260 Pkt	880 Pkt	71 Pcnt
1784667840	27.5 C	14.33 Volt	260 Pkt	860 Pkt	71 Pcnt
1784667541	27 C	14.33 Volt	260 Pkt	860 Pkt	71 Pcnt
1784667540	27 C	14.33 Volt	260 Pkt	860 Pkt	71 Pcnt
1784667240	26.5 C	14.33 Volt	260 Pkt	860 Pkt	71 Pcnt
1784666944	27.5 C	14.33 Volt	270 Pkt	860 Pkt	70 Pcnt
1784666940	27.5 C	14.33 Volt	270 Pkt	860 Pkt	70 Pcnt
1784666640	27.5 C	14.33 Volt	270 Pkt	870 Pkt	70 Pcnt
1784666341	26.5 C	14.33 Volt	280 Pkt	890 Pkt	70 Pcnt
1784666340	26.5 C	14.33 Volt	280 Pkt	890 Pkt	70 Pcnt
1784666040	27.5 C	14.33 Volt	280 Pkt	910 Pkt	71 Pcnt
1784665741	27.5 C	14.33 Volt	280 Pkt	900 Pkt	70 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

Dg1h: 0, 10, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)