S55YKA-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object S55YKA-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1772787671	13.75 Volt	1050 Pkt	300 Pkt	75 Pcnt
1772787670	13.75 Volt	1050 Pkt	300 Pkt	75 Pcnt
1772787370	13.83 Volt	1040 Pkt	290 Pkt	75 Pcnt
1772787073	13.83 Volt	1020 Pkt	280 Pkt	74 Pcnt
1772787070	13.83 Volt	1020 Pkt	280 Pkt	74 Pcnt
1772786771	13.83 Volt	1010 Pkt	280 Pkt	73 Pcnt
1772786171	13.83 Volt	980 Pkt	270 Pkt	73 Pcnt
1772785871	13.75 Volt	970 Pkt	280 Pkt	73 Pcnt
1772785871	13.75 Volt	970 Pkt	280 Pkt	73 Pcnt
1772785571	13.83 Volt	980 Pkt	280 Pkt	73 Pcnt
1772784971	13.83 Volt	950 Pkt	280 Pkt	74 Pcnt
1772784672	13.75 Volt	930 Pkt	270 Pkt	74 Pcnt
1772784671	13.75 Volt	930 Pkt	270 Pkt	74 Pcnt
1772784371	13.83 Volt	920 Pkt	260 Pkt	74 Pcnt
1772784071	13.75 Volt	920 Pkt	260 Pkt	74 Pcnt
1772784071	13.75 Volt	920 Pkt	260 Pkt	74 Pcnt
1772783770	13.83 Volt	910 Pkt	260 Pkt	74 Pcnt
1772783472	13.67 Volt	910 Pkt	260 Pkt	74 Pcnt
1772783471	13.67 Volt	910 Pkt	260 Pkt	74 Pcnt
1772783171	13.83 Volt	900 Pkt	260 Pkt	74 Pcnt
1772782872	13.75 Volt	900 Pkt	260 Pkt	74 Pcnt
1772782871	13.75 Volt	900 Pkt	260 Pkt	74 Pcnt
1772782571	13.67 Volt	920 Pkt	260 Pkt	75 Pcnt
1772782272	13.59 Volt	910 Pkt	260 Pkt	75 Pcnt
1772782271	13.59 Volt	910 Pkt	260 Pkt	75 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)