YC2YIZ-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YC2YIZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1789941391	0 Count	849 Count	0 Count	0 VDC	0 VDC
1789939591	0 Count	847 Count	0 Count	0 VDC	0 VDC
1789937791	0 Count	845 Count	0 Count	0 VDC	0 VDC
1789935991	0 Count	843 Count	0 Count	0 VDC	0 VDC
1789934191	0 Count	841 Count	0 Count	0 VDC	0 VDC
1789932391	0 Count	838 Count	0 Count	0 VDC	0 VDC
1789930591	0 Count	836 Count	0 Count	0 VDC	0 VDC
1789928791	0 Count	834 Count	0 Count	0 VDC	0 VDC
1789926991	0 Count	832 Count	0 Count	0 VDC	0 VDC
1789925191	0 Count	830 Count	0 Count	0 VDC	0 VDC
1789923391	0 Count	827 Count	0 Count	0 VDC	0 VDC
1789921591	0 Count	826 Count	0 Count	0 VDC	0 VDC
1789919791	0 Count	823 Count	0 Count	0 VDC	0 VDC
1789917991	0 Count	820 Count	0 Count	0 VDC	0 VDC
1789916191	0 Count	819 Count	0 Count	0 VDC	0 VDC
1789914390	0 Count	816 Count	0 Count	0 VDC	0 VDC
1789912590	0 Count	815 Count	0 Count	0 VDC	0 VDC
1789910790	0 Count	812 Count	0 Count	0 VDC	0 VDC
1789908990	0 Count	810 Count	0 Count	0 VDC	0 VDC
1789907190	0 Count	808 Count	0 Count	0 VDC	0 VDC
1789905390	0 Count	806 Count	0 Count	0 VDC	0 VDC
1789903590	0 Count	805 Count	0 Count	0 VDC	0 VDC
1789901790	0 Count	803 Count	0 Count	0 VDC	0 VDC
1789899990	0 Count	801 Count	0 Count	0 VDC	0 VDC
1789898190	0 Count	799 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)