WC4PEM-14 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WC4PEM-14. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Vin*	Dg1h*	Rx1h*	Eff1h*
1776856651	27.5 C	14.25 Volt	260 Pkt	930 Pkt	72 Pcnt
1776856651	27.5 C	14.25 Volt	260 Pkt	930 Pkt	72 Pcnt
1776856351	28 C	14.25 Volt	260 Pkt	950 Pkt	72 Pcnt
1776856051	28.5 C	14.25 Volt	270 Pkt	950 Pkt	71 Pcnt
1776856051	28.5 C	14.25 Volt	270 Pkt	950 Pkt	71 Pcnt
1776855751	28.5 C	14.25 Volt	270 Pkt	950 Pkt	71 Pcnt
1776855452	28 C	14.25 Volt	280 Pkt	960 Pkt	71 Pcnt
1776855451	28 C	14.25 Volt	280 Pkt	960 Pkt	71 Pcnt
1776855151	28 C	14.25 Volt	280 Pkt	940 Pkt	71 Pcnt
1776854851	27.5 C	14.25 Volt	280 Pkt	940 Pkt	71 Pcnt
1776854851	27.5 C	14.25 Volt	280 Pkt	940 Pkt	71 Pcnt
1776854551	27.5 C	14.25 Volt	290 Pkt	970 Pkt	72 Pcnt
1776854251	27.5 C	14.25 Volt	290 Pkt	980 Pkt	72 Pcnt
1776854251	27.5 C	14.25 Volt	290 Pkt	980 Pkt	72 Pcnt
1776853951	28 C	14.25 Volt	290 Pkt	970 Pkt	71 Pcnt
1776853793	27 C	14.1 Volt	250 Pkt	910 Pkt	73 Pcnt
1776853788	28 C	14.25 Volt	250 Pkt	920 Pkt	72 Pcnt
1776853651	28.5 C	14.25 Volt	290 Pkt	970 Pkt	71 Pcnt
1776853651	28.5 C	14.25 Volt	290 Pkt	970 Pkt	71 Pcnt
1776853351	28.5 C	14.25 Volt	300 Pkt	990 Pkt	72 Pcnt
1776853051	28 C	14.25 Volt	290 Pkt	980 Pkt	71 Pcnt
1776853051	28 C	14.25 Volt	290 Pkt	980 Pkt	71 Pcnt
1776852751	28 C	14.25 Volt	290 Pkt	960 Pkt	71 Pcnt
1776852452	27.5 C	14.25 Volt	290 Pkt	960 Pkt	72 Pcnt
1776852451	27.5 C	14.25 Volt	290 Pkt	960 Pkt	72 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

Dg1h: 0, 10, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)