E22ZMG-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E22ZMG-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*	SUN*
1787558190	7 ug/m3	12 ug/m3	13 ug/m3	-42 dBm	72 %
1787557565	7 ug/m3	11 ug/m3	12 ug/m3	-46 dBm	73 %
1787557040	14 ug/m3	22 ug/m3	23 ug/m3	-44 dBm	74 %
1787556316	8 ug/m3	12 ug/m3	13 ug/m3	-43 dBm	73 %
1787555692	8 ug/m3	12 ug/m3	13 ug/m3	-45 dBm	71 %
1787555068	7 ug/m3	9 ug/m3	9 ug/m3	-43 dBm	75 %
1787554443	8 ug/m3	13 ug/m3	13 ug/m3	-44 dBm	73 %
1787554210	9 ug/m3	12 ug/m3	12 ug/m3	-44 dBm	74 %
1787553586	4 ug/m3	7 ug/m3	7 ug/m3	-44 dBm	74 %
1787552962	7 ug/m3	12 ug/m3	12 ug/m3	-47 dBm	69 %
1787552337	6 ug/m3	9 ug/m3	10 ug/m3	-44 dBm	68 %
1787551713	7 ug/m3	11 ug/m3	11 ug/m3	-42 dBm	70 %
1787551088	6 ug/m3	10 ug/m3	10 ug/m3	-46 dBm	74 %
1787550464	7 ug/m3	9 ug/m3	9 ug/m3	-46 dBm	75 %
1787549839	8 ug/m3	11 ug/m3	12 ug/m3	-45 dBm	78 %
1787549215	8 ug/m3	12 ug/m3	12 ug/m3	-44 dBm	79 %
1787548590	7 ug/m3	10 ug/m3	10 ug/m3	-45 dBm	71 %
1787547966	5 ug/m3	8 ug/m3	8 ug/m3	-44 dBm	76 %
1787547391	11 ug/m3	16 ug/m3	16 ug/m3	-43 dBm	75 %
1787546718	35 ug/m3	59 ug/m3	70 ug/m3	-42 dBm	80 %
1787546093	9 ug/m3	12 ug/m3	12 ug/m3	-45 dBm	76 %
1787545469	9 ug/m3	13 ug/m3	13 ug/m3	-43 dBm	77 %
1787544845	4 ug/m3	6 ug/m3	6 ug/m3	-43 dBm	80 %
1787544220	6 ug/m3	9 ug/m3	10 ug/m3	-44 dBm	77 %
1787543596	9 ug/m3	14 ug/m3	15 ug/m3	-43 dBm	85 %

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

SUN: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)