EA5URV-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EA5URV-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1772523141	0 Count	476 Count	0 Count	0 VDC	0 VDC
1772519841	0 Count	371 Count	0 Count	0 VDC	0 VDC
1772516541	0 Count	260 Count	0 Count	0 VDC	0 VDC
1772514740	0 Count	209 Count	0 Count	0 VDC	0 VDC
1772511440	0 Count	137 Count	0 Count	0 VDC	0 VDC
1772508140	0 Count	64 Count	0 Count	0 VDC	0 VDC
1772504840	0 Count	1051 Count	0 Count	0 VDC	0 VDC
1772501540	0 Count	975 Count	0 Count	0 VDC	0 VDC
1772498240	0 Count	912 Count	0 Count	0 VDC	0 VDC
1772494940	0 Count	845 Count	0 Count	0 VDC	0 VDC
1772493140	0 Count	807 Count	0 Count	0 VDC	0 VDC
1772489840	0 Count	726 Count	0 Count	0 VDC	0 VDC
1772486540	0 Count	633 Count	0 Count	0 VDC	0 VDC
1772483240	0 Count	557 Count	0 Count	0 VDC	0 VDC
1772479940	0 Count	455 Count	0 Count	0 VDC	0 VDC
1772476640	0 Count	372 Count	0 Count	0 VDC	0 VDC
1772473352	0 Count	294 Count	0 Count	0 VDC	0 VDC
1772471545	0 Count	252 Count	0 Count	0 VDC	0 VDC
1772468245	0 Count	164 Count	0 Count	0 VDC	0 VDC
1772464945	0 Count	72 Count	0 Count	0 VDC	0 VDC
1772461645	0 Count	1026 Count	0 Count	0 VDC	0 VDC
1772458345	0 Count	948 Count	0 Count	0 VDC	0 VDC
1772455045	0 Count	874 Count	0 Count	0 VDC	0 VDC
1772451745	0 Count	807 Count	0 Count	0 VDC	0 VDC
1772449941	0 Count	776 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)