DO1TFS-7 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DO1TFS-7. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1774405376	977.3 hPa	28.9 C deg	27.2 %	1000.2 hPa	0 C deg
1774403548	978.1 hPa	29.2 C deg	27.1 %	1001 hPa	0 C deg
1774401733	979.5 hPa	29.5 C deg	27 %	1002.4 hPa	0 C deg
1774399922	980.4 hPa	29.8 C deg	27.2 %	1003.3 hPa	0 C deg
1774398114	981 hPa	29.9 C deg	27.6 %	1003.9 hPa	0 C deg
1774396288	981.7 hPa	29.6 C deg	28.4 %	1004.6 hPa	0 C deg
1774392678	983.1 hPa	28.9 C deg	29.2 %	1006.1 hPa	0 C deg
1774390859	983.6 hPa	28.9 C deg	29.6 %	1006.6 hPa	0 C deg
1774389044	984 hPa	29.4 C deg	30 %	1007 hPa	0 C deg
1774388159	984.5 hPa	29.1 C deg	30.2 %	1007.6 hPa	0 C deg
1774386317	985.2 hPa	29.7 C deg	30.5 %	1008.2 hPa	0 C deg
1774382686	985.8 hPa	21.6 C deg	41.1 %	1009.5 hPa	0 C deg
1774301934	994.2 hPa	31.6 C deg	29 %	1017.3 hPa	0 C deg
1774300704	994.2 hPa	32.5 C deg	29.1 %	1017.2 hPa	0 C deg
1774298891	994.2 hPa	31.6 C deg	31.7 %	1017.3 hPa	0 C deg
1774297072	994.2 hPa	22.6 C deg	42.8 %	1017.9 hPa	0 C deg
1774043182	992.5 hPa	33.7 C deg	28.1 %	971.4 hPa	0 C deg
1774043064	992.5 hPa	33.6 C deg	28.4 %	971.4 hPa	0 C deg
1774042871	992.4 hPa	33.3 C deg	29.1 %	971.3 hPa	0 C deg
1774041367	992.5 hPa	29.3 C deg	34.9 %	971.1 hPa	0 C deg
1774040907	992.5 hPa	22.6 C deg	44.5 %	970.6 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)