SR5E Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR5E. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPU Temp*	CPU Usage*	Temp DS1*	Temp DS2*
1761595206	31 Deg.C	2 %	31.6 Deg.C	31.6 Deg.C
1761594602	32 Deg.C	2 %	36.8 Deg.C	36.8 Deg.C
1761594006	31 Deg.C	2 %	36.8 Deg.C	36.8 Deg.C
1761593402	32 Deg.C	2 %	33.3 Deg.C	33.3 Deg.C
1761592202	33 Deg.C	2 %	30.1 Deg.C	30.1 Deg.C
1761590402	33 Deg.C	2 %	28.5 Deg.C	28.5 Deg.C
1761589806	33 Deg.C	2 %	28 Deg.C	28 Deg.C
1761589202	34 Deg.C	2 %	28.7 Deg.C	28.7 Deg.C
1761588606	34 Deg.C	2 %	28.9 Deg.C	28.9 Deg.C
1761588002	32 Deg.C	2 %	30.3 Deg.C	30.3 Deg.C
1761587402	33 Deg.C	2 %	28.3 Deg.C	28.3 Deg.C
1761586806	33 Deg.C	2 %	28.6 Deg.C	28.6 Deg.C
1761586202	34 Deg.C	2 %	29.1 Deg.C	29.1 Deg.C
1761585606	33 Deg.C	2 %	29.3 Deg.C	29.3 Deg.C
1761585003	33 Deg.C	2 %	30.5 Deg.C	30.5 Deg.C
1761584406	32 Deg.C	2 %	30.9 Deg.C	30.9 Deg.C
1761583803	34 Deg.C	2 %	31.6 Deg.C	31.6 Deg.C
1761582606	33 Deg.C	2 %	31.1 Deg.C	31.1 Deg.C
1761582003	34 Deg.C	2 %	29.1 Deg.C	29.1 Deg.C
1761580206	33 Deg.C	2 %	28.1 Deg.C	28.1 Deg.C
1761579602	34 Deg.C	2 %	27.7 Deg.C	27.7 Deg.C
1761579002	33 Deg.C	2 %	28 Deg.C	28 Deg.C
1761577803	32 Deg.C	2 %	28.8 Deg.C	28.8 Deg.C
1761577205	32 Deg.C	2 %	28.6 Deg.C	28.6 Deg.C
1761576602	34 Deg.C	2 %	29.6 Deg.C	29.6 Deg.C

*Used Equation Coefficients:

CPU Temp: 0, 0.1, 0

CPU Usage: 0, 1, 0

Temp DS1: 0, 0.1, 0

Temp DS2: 0, 0.1, 0

Value5: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)