EL-DO0KGS Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-DO0KGS. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1784715377	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	11 TXcount/10m
1784714777	0 RX Erlang	0.22 TX Erlang	0 RXcount/10m	26 TXcount/10m
1784714177	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	12 TXcount/10m
1784713577	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	7 TXcount/10m
1784712977	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	9 TXcount/10m
1784712377	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	3 TXcount/10m
1784711789	0 RX Erlang	0.3 TX Erlang	0 RXcount/10m	25 TXcount/10m
1784711177	0 RX Erlang	0.08 TX Erlang	0 RXcount/10m	7 TXcount/10m
1784710577	0 RX Erlang	0.4 TX Erlang	0 RXcount/10m	19 TXcount/10m
1784709977	0 RX Erlang	0.56 TX Erlang	0 RXcount/10m	12 TXcount/10m
1784709377	0 RX Erlang	0.77 TX Erlang	0 RXcount/10m	39 TXcount/10m
1784708777	0 RX Erlang	0.06 TX Erlang	0 RXcount/10m	7 TXcount/10m
1784708177	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	7 TXcount/10m
1784707577	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	10 TXcount/10m
1784706977	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	7 TXcount/10m
1784706377	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	8 TXcount/10m
1784705777	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	8 TXcount/10m
1784705177	0 RX Erlang	0.51 TX Erlang	0 RXcount/10m	24 TXcount/10m
1784704577	0 RX Erlang	0.5 TX Erlang	0 RXcount/10m	15 TXcount/10m
1784703977	0 RX Erlang	0.93 TX Erlang	0 RXcount/10m	11 TXcount/10m
1784703377	0 RX Erlang	0.48 TX Erlang	0 RXcount/10m	31 TXcount/10m
1784702777	0 RX Erlang	0.1 TX Erlang	0 RXcount/10m	10 TXcount/10m
1784702177	0 RX Erlang	0.14 TX Erlang	0 RXcount/10m	14 TXcount/10m
1784701577	0 RX Erlang	0 TX Erlang	0 RXcount/10m	1 TXcount/10m
1784700977	0 RX Erlang	0.1 TX Erlang	0 RXcount/10m	27 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)